Search results

Looking for M105A3 surge brake unit or one that will work on an M105. An 1101 or 1102 may work too. I'm in Indiana. One for sale in parts but the owner (new member) won't reply.

Looking for (2-3) M105A3 rims, 6 bolt x 8.75 x 22.5". Close to North Indiana best.

We have a company that makes roll off containers using a lot of steel seconds but has hit a wall for orders (none). I have the idea of making a conversion for a 931 or 923 that looks like the bed of a 929 and is a complete unit that is ready to set on the frame, a lot like the existing bed...

What is the latest on gears for the deuce to bring it to safe highway speed? Brakes note; my A3 4x4 has 50/50 MC and 1 1/2" wheel pistons. I do not want to have an overdrive that spins the drive fast. My final for the Allison is 1/1 and tires 395 (rated to 65). Can it be done with a...

What am I missing? I researched the wiper blades and came up with an Anco 41-01 and blade 31-13. They don't just slide together as the former post stated. I must have picked up the wrong numbers, the quick reference sticky has entirely different numbers.

Has anybody seen these big Sand Trail 450 tires used on a vehicle? I know they will not fit on a double axle rear deuce due to front hitting back (like the 14.00). My 4x4 has room in the rear but a big worry is front rubbing. They are very close to the diameter of a 14.00, so any info on...

My 929 that is excellent otherwise had wet insulation on the underside of the hood and made spots of rust on the inside of the hood. I removed it and it dried out and put the rust in check. In north Indiana we can get rather cold, so not having insulation could be a problem. I'll be...

I'm wondering what rims could be used on the back of my 4x4 M35A3 with 12.00 dual (budd) rim. Is there a one piece rim? Will have 395 on front.

Has anyone made a trailer from the long cargo 5 ton bed? I need to haul ground up wood to my place from 30 miles away and lay it down in a 4-6" bed about 4' wide right out of the trailer. Need lots of volume and a way to self unload. The long cargo seems a good start point for the basic bed...

I have several rims that appear to have the same offset as the HEMTT rims and they have 1" holes on 11.25 bc. They have the same 8 5/8" center as my 5 ton rims. While I know our 5 tons are considered bolt centering, is the hub close to the wheel size to act as hub centering? I read also about...

I'm making some modifications to my M1061 for hauling sawdust, mainly behind my m929A2. I don't want to make it into a dump but I still want a way to offload that is not my back operating a shovel, although bagging it up directly from the trailer is an option. I'm leaning toward a mechanism to...

Has anyone upgraded brakes to s-cam air on an 809 series truck?

Has anyone seen a hot rod, maybe not 4wd, hummer? Rat rod? I have a wide Dana 80 with 410 I'm wondering about adapting. Are there any bodies around, not all beat up, to build from?

I thought my dump had hawkers but I found I had Exide. This is the only one of 15 5 tons that started under its own power when I bought it and with some convincing (charging) has lasted a couple years without major attention. I sure was glad to find Exide, it seems my small charger works with...

Building a 16 bay dipole antenna to get over air digital TV...hope it works. I'll build another for Chicago stations if this one, pointed at Fort Wayne, performs well. Notice the use of fiberglass seat components. It's really rigid. This is in-process build. I have a lot to do, putting on...

What tan and sand colors do you like?

I scored a set (6) of the Isuzu 6 lug Budd wheels and tires, 17.5 tubeless that should go on an m105 trailer or axle. I went ahead and committed, hoping to find a use. Earlier I bought 6 of the same but 19.5" for a tandem trailer. I'll probably turn this to a "for sale" but couldn't pass up a...

I'm rethinking my air system on my my M35A3 4x4 project and just got the old Haldex DRYest back from puttiing a new one on the 929. I could rebuild it......or buy a new one, maybe less capacity. I want to add some reserve for using air tools, so need an ASME tank. There is brake assist...

What (if any) 5 ton transfer cases do NOT have a problem with backing in low range?

I'm beginning a trailer build using (2) M105 axles. I just purchased some motor home tires and wheels, 19.5" budds with 8 x 19.5 tires. Got 6 and will have to find 3-4 more. Would like to have a couple spares. On the axle, they measure outside to outside....8'5"....so real close to the legal...