Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ok, so left side PTO drive to the 2speed Dana Vdrive and back up to the pump over the transmission? I like it. What PTO drive did you use? Are you looking to use this while driving? If so, you may need to tweek the allowable PTO RPM limit settings in the TCU. Our local FD district where we...
What Geo said. It is really only appropriate to charge with 24 when that is all that is typically being drawn from the batts(discharged equally)… a small balancer really should be used on these trucks when charging with straight 24…
Well the leds I am putting on the cab rear bumper and habitat are two level, designed to be running and signal lights. They are surface mount aluminum base with plastic lenses. They make 3 sizes in orange, red, white.
There is already ground and running light power to the front cab and door...
I did some light work also:)
Replaced the front bumper lights with LED headlights and driving/fog lights. Both have halo ring DRL and turn signals. Also updated the lower cab and door marker lights and incorporated turn signals into them as well. Have a little more wiring to do(fog light...
Well the labeling leads me to believe that is the polarity protection device. Diodes in an aluminum heatsync that only allow current to flow one direction. The only reason to bypass it would be if you suspected the diode was bad.
But lets play what if... So your are a new mechanic fresh...