Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I did get this at least somewhat rebuilt. It is working and holds the gen for now. I couldn't fix the broken pieces of metal since they are cast but by straightening the bent pins it will hold for now as long as it doesn't take any shocks it should sit there fine and even adjust as needed...
I did get this torn down. The pins were bent and the part the leg rides down on was pretty broken. It is cast metal so welding it isn't on the table. I straightened the pins and got it reassembled and working it just won't take a lot of weight . It's pretty easy to work on just roll pins. It's...
It's the M116A3 trailer. It's a drop down leg that's adjustable with a crank. I bought a harbor freight one that clamps onto the frame but I would really like to get it back to original but oh well. Thank you for taking time to help though.
Thanks for the replies. I will get better at giving history and hours ect. I am newly addicted to these gens. I bid on two thinking I might get one but got them both. lol. So I have an 802A this one. it has 2165 hours and thats about all I know. I did give it an oil change when I got it a couple...
I load tested my 802 a bit. I put 15 amps on each phase with it set to 120/240 volt single phase. It held with no problem but as it got hot it seemed to increase. crank case pressure a bit. It wasn't like some of these I've seen where it looks like and oily exhaust pipe but when I took out the...
Hello I have an 802A I recently acquired and it seems to run decent but there is a lot of fuel I guess all over the engine compartment. ( please bear with me on this since I don't have a sense of smell fuel and oil ect are all very similar to me when there is just a fine coating) I haven't seen...