Search results

I know it isn't heavy but are you supposed to be pulling anything in reverse? And, when you come across a ditch like that aren't you supposed to approach at an angle?

Behind and above the passenger seat.

Added my Solar Charger and cut off switch between batteries

Snow...what brand camera did you use? I'm looking for one.

Snow. How did you mount the bed crane to your bed? Did you put a plate under it? Also where did you put the camera in the back? over the pintle hitch? I got the other type of bed crane because the base was wider with 8 bolt holes and not as tall. I also picked up 2 more base plates so I can...

Doesn't crank is if no electricity is getting to the solenoid. Batteries are all good and fully charged/maintained. Next time it happens I'll check the connection at the coil with my Fluke Voltmeter to see if its getting electricity. If it isn't it has to be the control box.

Was having problems with my truck not starting from time to time. It usually happens after I try to start it multiple times. The first few times it starts right up. but after I drive it and repeatedly turn it on and off there comes a point where it will not start. So, I installed a second...

Wired the solar charger. Added a second starter system to bypass the box. and put the bows/cover on.

Put my go light on and got the other caution light on.

how loud is it? I would think it would be better to run it out the back because of the noise

Added another fire extinguisher. The jerry can holder was replaced because it didn't fit a jerry can with my ISO bed. Now I have 2 fire extinguishers. One 10 lb in the cab and one 20 lb out side.

Made some light posts

I got it from the ACE hardware store. You can put 2 sideways/horizontal. But, it would be better to just wire a dome light.

thanks. The extinguisher came with the truck. I'm putting another one on it behind the cab. My truck is a M923 Marine. So, it came with the fording kit, lockers and set up for hydraulic winch

replaced wind shield painted cab installed seats installed cup holders

Upholstered all the seats for 15 bucks. Just under 3 yards of material from Joan Fabrics and was on sale. FYI the driver seat need self tapping screws.

didn't do the windshield because its getting replaced. doors will be replaced as well

Behr's Paint. I think it was 32 per gal. I did entire outsids with a gallon and a half. Still have to do the cab and bed

Painted the truck