Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I just came back from the rally where we had a great time. Since I did not talk to wheelspinner there, could you please find out what his schedule is and where I could pick up the tank. Drop off in Hughesville is not a problem as I often take the backroads to the Bay Bridge to avoid the insanity...
Depending on where you live in MD, I could pick a tank up in NC and drop it off. I will head North with a mostly empty trailer about a week after the rally.
I am also in the market for a (knuckle boom) crane that I can graft onto the back or my FLU419 SEE in lieu of the backhoe. I'll be at Windrock Friday, Saturday and Sunday.
Does anyone need a seal kit for the tall hydraulic jack?
Cost is $41 from the manufacturer but shipping from Germany a minimum of $54.
I'll spread the shipping cost over multiple kits if there is interest. LMK.
Thanks for the suggestions. I'll look for the
interior padding. Pulling the engine and insulating the firewall is an add-on project to the main task of installing A/C .The interior firewall is bare and easy to get to at the moment.
Harmonic balancer is already ordered and hoses/belts will...
Thanks for the info.
Did you leave the transfer case connected to the transmission? I was planning to take it off to reduce weight and to avoid getting hung up somewhere with the extra width.
OK, I am going to pull the engine/transmission.
Couple of questions:
Does the big electrical connector on the firewall come apart from the fuse box inside or do I have to take the harness off the engine?
Take the lines off the hydro-boost unit or take the PS pump off the engine?
Where is a...
Can the engine and transmission of a M1009 be pulled together from the front if the front grille assembly, hood, and both outer and inner fenders have been removed?
I removed the entire front grille assembly to install a condenser for air conditioning and I am tempted to add a day or two to the...
Cut new hole in firewall, patched old one, and installed interior air box:
Blower/Evaporator mated to air box:
Now waiting for condenser, compressor, hoses and fittings to arrive. Will clean and test the air box in the meantime.