Recent content by Casasenita

Thanks Papakb. I guess it is time to install a cutoff! Sent from my iPhone using Tapatalk

Tell me if I am correct... If you use a solargizer on your batteries and install the cutoff switch, the solargizer is taken out of the loop and is ineffective when the cutoff switch is in the off position. I have a solargizer and would like a cutoff, but it seems counterproductive if used...

I just received a tan “softslant” from Bulldogger today. I unwrapped it to check out his handy work and was thoroughly impressed. It is innovative and affordable. Unfortunately, before putting it on I need to change the camo paint job to desert tan, inside and out. I have a feeling I won’t be...

Skrilex, thanks for the vinyl wrap idea. I may go this route instead of hand painting the sharks teeth. The digital and Greek ideas are definitely new to me! Sent from my iPhone using Tapatalk

Hey fellas, let’s share some exterior paint jobs on our hmmwv’s. I plan on painting 3 different variations this summer. Being a pilot, one will definitely be the shark teeth design that was immortalized by the Flying Tigers on their P-40’s. I am not sure if I will paint it on OD green with black...

The starter looks to be grounded now. I would also lean towards the cutoff switch. Sent from my iPhone using Tapatalk

The same thing happened to me. I ended up drilling, tapping and putting in a new bolt. It worked great, but be gentle with the drilling. You don’t want to go too deep. For everyone putting on a harness, make sure you use silicone or something similar to protect this area from corrosion...

I appreciate the advice, Papakb. I removed all the connections and added star washers, connected to a front bolt of the ESS and will definitely try Kroil for future projects. As for the starter bolt, I was successful in using an extractor to get the remainder of the bolt out. The two hmmwv’s...

I bought and installed 2 Kascar grounding kits easily with the help of the above video. I ran into trouble with the 3rd install. The grounding bolt in the starter sheared off and then the bolt for the ESS is stubborn. I am attempting the aft bolt to connect to the ESS. Can I use the front bolt...