-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Recent content by Chuck76
-
C
What did you do to your deuce this week?
Fired her up for the first time in sevral weeks ( off and on HH install ). Adjusted the brakes...they need to be bled now, But good enough to drive. Made a 40 mile round trip to work and back with 0 problems! -
C
More Help needed.........
After purchasing another HH, she breathes again!!!!!:doghead: -
C
More Help needed.........
managed to take off the spring plate, spring, retainer clips, off of the old HH, and installed on the new HH, found another button. Installing the buttons retaining clip, managed to break one of the ears. Orderd 5 of them from Ambac. Dead in the water till they get here. Really considering... -
C
More Help needed.........
long story short, I have replaced the HH due to no start issues. I still had a now start, but due to fuel not getting to the injectors. Pulled the HH and found pieces of the clip and button. Now the help I need is confirming what I believe to be correct.... when I pulled the HH the first... -
C
no fuel getting to injectors
after pulling the HH off, I found pieces of the clip and the button...... -
C
no fuel getting to injectors
I cant find the button. I have another clip. -
C
no fuel getting to injectors
WEELLLLLLLLL... pulled the new HH off, and found pieces of the button and clip. I have gone back through looking at timing....#1 cyl is at TDC on compression stroke (also verified its companion cyl) The red scored tooth was lined up with the indicator mark in the "window" of the IP. So I... -
C
no fuel getting to injectors
Guess thats gonna be my next step....to tell the truth about it, tired of working on this truck. At least b4 the new HH, It would start off of either. -
C
no fuel getting to injectors
messing around with the fuel system, I noticed fuel pouring out of the inlet valve of the HH. I took the return valve/ check valve off of the HH, and started messing with the plunger of the check valve. After spraying it with brake cleaner and compressed air, I think the valve was stuck open... -
C
no fuel getting to injectors
removed the plug in the top of the HH, the pluger is jumping up and down, just fine. Took 2 injector lines off of the HH and not getting any fuel out. I rechecked the fuel shut off control/valve...it'll only go in one way...and thats the way its installed........................ out of ideas -
C
no fuel getting to injectors
Ive tried all the tricks I know to free the plug in the top pf the HH. Guess I'm gonna have to put the inpact gun to it.....shane to have to treat new parts in such a manner. I'll try it in the morning...dont think the neighbors want to hear a compressor/impact running at 2am.....