• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

deank's latest activity

  • deank
    deank reacted to adf5565's post in the thread CUCV M1008 Build with Like Like.
    Finally put on new rims and tires. Black rock 942688042 and Mastercraft Courser CXT 285 75 r16. I think it looks so much better. Also...
  • deank
    deank replied to the thread Central FL M1031 project.
    • IMG_9120.jpeg
    • IMG_9122.jpeg
  • deank
    deank replied to the thread Central FL M1031 project.
    Oh the things we do to make things work! my engine hoist worked great when I swapped in a 5.0 on my 96 Ranger. But on an M1031, I...
    • IMG_9116.jpeg
    • IMG_9117.jpeg
  • deank
    deank reacted to Commander5993's post in the thread Need Some Help with Rear Axle Seal "blow out" with Like Like.
    just came across this thread while looking for some info about alternators. Its been a year since my last update to this. I figured out...
  • deank
    deank replied to the thread 1986 M1009 Rear Light Nightmare.
    Not sure what the unknown connector is. The brown wire with the rubber head on it goes to the brake sensor (cannot remember the correct...
  • deank
    deank posted the thread Injector Pump, reseal or replace? in CUCV.
    Good evening. A question for the collective. I have an 86 M1031, 16 k miles. Currently resealing the transfer, transmission and the...
  • deank
    deank replied to the thread Central FL M1031 project.
    Evening All, lots of little things accomplished this afternoon. 8 more bolts and the engine comes out. All the wiring is disconnected...
    • IMG_9066.jpeg
    • IMG_9067.jpeg
    • IMG_9068.jpeg
  • deank
    deank replied to the thread Central FL M1031 project.
    Hello All. Today I started disassembly to remove the engine. Removed the alts, radiator, generator speed controller. Took lots of...
    • IMG_9048.jpeg
    • IMG_9058.jpeg
    • IMG_9059.jpeg
    • IMG_9049.jpeg
    • IMG_9050.jpeg
  • deank
    deank replied to the thread Central FL M1031 project.
    One last update for today. used a 1/16 drill bit to drill two holes in the shifter shaft seal. Screwed in two #8 screws, used vise...
    • IMG_9047.jpeg
    • IMG_9046.jpeg
  • deank
    deank replied to the thread Central FL M1031 project.
    Replacing the seal and gasket on the front pump went surprisingly well. Homemade slide hammers work well except for the one pinched...
    • IMG_9035.jpeg
    • IMG_9036.jpeg
    • IMG_9037.jpeg
    • IMG_9038.jpeg
    • IMG_9045.jpeg
  • deank
    deank reacted to cucvrus's post in the thread M1009 Little Red Riding Hood. with Like Like.
    Today I want to talk about the Pivot Rivet for GM wing vent windows. Yes it is a real thing and I bought a box of 50 of them from...
  • deank
    deank replied to the thread Central FL M1031 project.
    Hello All. Been getting work done lately. Resealed the transfer case over the last month. yesterday I removed the trans crossmember...
    • IMG_9020.jpeg
    • IMG_9024.jpeg
    • IMG_9026.jpeg
    • IMG_9028.jpeg
    • IMG_9030.jpeg
    • IMG_9031.jpeg
  • deank
    deank replied to the thread What have you done to your CUCV today/lately - Part 2.
    Spring break is here, getting some time in the shop. Over the last month I managed to reseal the transfer case. In the last two days I...
    • IMG_9020.jpeg
    • IMG_9024.jpeg
    • IMG_9026.jpeg
    • IMG_9028.jpeg
    • IMG_9030.jpeg
    • IMG_9031.jpeg
  • deank
    deank replied to the thread M1009 Little Red Riding Hood..
    I know your pain…
  • deank
    deank reacted to cucvrus's post in the thread M1009 Little Red Riding Hood. with Like Like.
    This picture shows window frame with the new rubbers installed before the vent glass is attached. This is the completed right wing vent...
Show older items
108,734members
163,953threads
2,306,544posts
464online users
Top