Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You know what. I have not tried that.
I'll do that next.
I did pull the bolt but not the whole valve out. I know its getting some fuel in the hydraulic head because with the plug out of the top and cranking the engine it will run fuel out of the top, but it might not be enough.
So I just got this m35a2. I got it running bit now it dies and wont start. Seems to be a fuel issue. I have fuel pressure and plenty of fuel getting to the injection pump, but nothing coming out of it. I pulled the hydraulic head and inspected it, seems to be fine. The clip and button are in...
ok guys its me again. looking for help with my deuce. the problem that just arised yesterday that has never happened before. i got called out las night to go pull a jeep out of being stuck. went to get my truck and it was hard to start (never done this before) it cranked, but took alot of...
if its still open diff u wont feel any resistance. i have broke 2 front axle shafts (notice my pic) both in reverse. i would say its worth pulling the shaft and checking before actually tearing into the diff. just a sugestion. my first one broke inside the carrier, and the second one just...
i thought about the gearing, and considered that the diesel only turns around 2500 RPM'S (give or take a little) not sure what the gas 6 cylinder turns, but im guessing its around the same. now a stock small block and big block can easily crank out 5000. with the gearing these things have i...
o.k. guys. just an idea im kicking around. has any one ever put in a gas engine V8 in a deuce. i just accumulated a reo with the gas 6 cylinder. the guy says it ran when it was parked, but if it doesnt, my idea is to put in either a small block or big block chevy (whichever 1 i come up with...
do u guys know if u can run the 395's on the rear as duels? i have the tires on my truck and i seem to get some wheel hop when off road. (didnt do it with the 9.00's) and they do hit the bed and front fenders when it tweaks. any ideas on how to lift the truck up a little? and another problem is...
O.k. Now this sucks. I just had to leave my deuce stuck over night in the west tx sand hills due to another brocken axle shaft. Yes another meaning this would be the 2nd one i have broke. And this time i wasnt even being hard on it. So luckily i happen to be a heavy equipment operator and...