• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

maggie8264's latest activity

  • M
    maggie8264 replied to the thread I am baffled!.
    It seems like there is more than one 12K shaft, does anyone have a part number for the one that will fit?
  • M
    maggie8264 replied to the thread I am baffled!.
    This is what i think happened. Either the hub was replaced with a 12K hub or the input gear was changed to the 12K gear. And The half...
  • M
    maggie8264 replied to the thread I am baffled!.
    The splines on the input gear appear to be fine. So, I'm thinking I must have a 12K input gear in my 10K hub. Will a 12K half shot...
    • IMG_3998.jpeg
    • IMG_3999.jpeg
    • IMG_4001.jpeg
  • M
    maggie8264 replied to the thread I am baffled!.
    Update, after visiting the shop, the spline on the half shaft will turn inside the drive gear. Does that mean it is a 12K hub? The...
    • IMG_3876.jpeg
    • IMG_3997.jpeg
  • M
    maggie8264 replied to the thread I am baffled!.
    Thanks, mechanic said shafts look identical, splines are the same. I am going to stop in there tomorrow. Will let you know what I find.
  • M
    maggie8264 replied to the thread I am baffled!.
    It has v belts.
  • M
    maggie8264 replied to the thread I am baffled!.
    It drove fine before. Bought from eBay. Truck is still at the shop.
  • M
    maggie8264 replied to the thread I am baffled!.
    I have a 1989 M998. Part #12342974-3
  • M
    maggie8264 posted the thread I am baffled! in HMMWV.
    My front left hub was leaking at the input seal. But when I went to change, the bolt holding the half shaft in the hub was tight and...
Show older items
108,849members
164,008threads
2,307,531posts
876online users
Top