• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by ProPower

  1. ProPower

    MEP-006A fuel & IP questions

    Roll the engine over till the marks on the harmonic dampener line up. You can barely see the marks but they are there! Now the lines in the window on the pump should be lined up!
  2. ProPower

    MEP-006A fuel & IP questions

    The fuel solenoid only opens when the day tank float is lowered! The day tank gravity feeds the injection pump! The injection pump has more than likely failed! The last 8 gen-sets or so that I have bought have had bad pumps! (Im not a very lucky guy) Word of advice though, dont keep trying to...
  3. ProPower

    M1031 CUCV transfer case (NP241C)

    The GM241 was made from 1988-2000 but only made the passenger side drop from 88-91. Most of 88-91 cases were the 27 spline units but they can easily be converted over to 32 spline units because most all of the internal parts all the way till 2000 are the same! You can also use the input shaft...
  4. ProPower

    Rear end noise when turning

    I'm assuming this is on a m1009 being that's what is in your avatar! When the axle shaft broke did the brake backing plate get bent or damaged? This happens often and if it is even slightly bent in this will cause a rubbing/grinding noise! The axle shafts in a m1009 float back and forth slightly...
  5. ProPower

    New Michigan License Plate Law for MV's Passes

    GREAT NEWS! This is a step it the right direction for Michigan! Thanks to all those involved in making this happen!
  6. ProPower

    Georgia USMC Wreckers

    That was a typo! It was listed as a tractor but was really a wrecker! And yes almost all of them had bulletproof glass!
  7. ProPower

    Georgia USMC Wreckers

    Yes, but there not burnt! It is a spray on rust preventative!
  8. ProPower

    Georgia USMC Wreckers

    Only one truck in this sale was residue and it sold for 3200 which is still less than scrap value! Worse case scenario I'll build one truck out of the two!
  9. ProPower

    Georgia USMC Wreckers

    I was lucky to get the two I won! Cant wait to get them home!
  10. ProPower

    Georgia USMC Wreckers

    So does anybody know the one guy who bought six of these in Georgia! First group of marine wreckers I've seen! GOD I HOPE IT'S NOT A SCRAPPER!
  11. ProPower

    Just picked up MEP002 Batteries drain in 2 weeks

    I had the same problem! And I fixed it! TM 5-6115-584-12. Pg. 130 Figure 4-23. Battery charging alternator. Item #5 Regulator/Rectifier. The circuit board in this box is probably burnt up! You can buy a rebuilt one for about $50 or send yours to Tom at Gulf Coast trucks in Texas for a...
  12. ProPower

    How to check IP?

    Not necessarily, you will not always hear them click! I cant hear any of mine!
  13. ProPower

    How to check IP?

    It sounds like its air locked to me! Maybe from being jelled up! Both of my 1028s did this last week when we were cutting wood in 0* weather! Try pressurizing the fuel tank while your rolling it over! These trucks are very picky about fuel pressure!
  14. ProPower

    Did the 936s ever come with lockers?

    I know most of the other Marine trucks have lockers but what about the wreckers? I've searched and came up with nothing!
  15. ProPower

    M936 A2 transfer case problem

    Mine also got stuck when I first brought it home! A little penetrating oil on the shifting rods, some adjusting and now it works fine! I also pitched the low range/reverse safety lockout rod because it was binding up just like yours! Id start there! Good luck!
Top