Search results

I have had my 1008 lifted for a few months and a few miles now but I am still trying to pinpoint my brake issue. Whenever I get on the brakes pretty hard, the truck wants to pull VERY hard to the right. I can counter-steer the pulling but I don't want this to become a safety issue if I ever get...

A couple of weeks ago when I installed my lift, I let the front differential droop down too far with the driveshaft still attached and ended up ripping the boot. I really want to replace it, but after asking around a little I was not that it is not absolutely necessary. Just wondering what...

I read in another thread where Westech stated that brake lines off of a '94 Chevy 2500 2wd were a direct replcement for the lines on the 1008 but were 4" longer. Since my truck is soon to be lifted I figured I would go ahead and get them. I was looking at buying these but there are two versions...

I finally got around to changing the belts and coolant and heater hoses on my 1008. I flushed the cooling system and went to fill the system, but this is where I ran into a problem. The system capacity is 24.8 quarts, which of course comes out to a little over 6 gallons, so I bought 4 gallons of...

I will be changing the belts and hoses and flushing my cooling system on my 1008 this weekend (hopefully). To my knowledge there is nothing wrong with the water pump at this time (leaks, bearings, etc). For all I know it may last another 50,000 miles, but I cannot bring myself to fully trust a...

I am going to install a 6" lift on my M1008 in a couple of weeks and have a steering question. After looking through several old threads, it seems that the general consensus is that crossover steering is an almost must if you are going to be running a 4" or larger lift. I was planning on...

Hello all. I picked up a M1008 Friday and have been driving/enjoying it all weekend. A couple of problems have already surfaced, but I have found plenty of good information here already to fix my problems (death wobble and alternator). I have also ordered a 6" lift and plan to run 37" Humvee...