Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Try this company. They can make you one, I think. Tell them Orren Winjum sent you.
John Johnson Company
274 Waterman Street
Detroit, MI 48209
1-800-991-1394
1-313-849-5209
Dick Dancy X107
Mark
I've got a set you can have if you pick them up, for FREE.
I'm located near Live Oak, FL 32060.
Call me if you like at 386-658-3539; leave message if no answer.
Orren Winjum
I have a MEP 831A but the thing starts OK but then goes crazy with backfire and lots of
black smoke. Generator does put out OK for the few seconds it runs.
Do you guys have any idea what may be the problem and who would work on it?
Thanks very much for your help.
Orren
I found the following years ago:
"Can use a fan clutch off a 1996 F-350. Need 1 ½” set collar welded to the fan hub. Also, longer bolts are needed. Trim new blades to the same diameter as the original blades."
I hope this may help. I could use one of these...
Great looking trailer. Just got mine the other day with some side boards. I'm looking for
four fiberglass boards (3/4" X 3 3/4" X 108") to repair one side. Do you have any or
have any ideas where I might find them?
Thanks for your help,
Orren
I have a 1969 M36A2C that is on it's way to becoming a go-anywhere-camper. Yours looks great but still like
my dual wheels in case one goes flat in the middle of nowhere. Thought about being able to put tracks on the
rears. My wrench is handy, too. If you don't mind, about what did you...
Sorry, I do not know the answer to your question. So far I have not been able to locate
any Canadian wheels so I have not been able to measure them. I would like to know
the answer to your question, too.
If by chance you come across a couple please let me know. I do not need the tires...
After trying the above fix and still no go take the high pressure pump on the IP apart.
There is some seals that may need replacing and check all other parts for defects.
Read manual for best hints on what to do.
See you mess with odd parts and was wondering if you had and old
'G' model injection pump or parts from same?
Parts off a Code G Fuel Injection Pump (Type PSB-6A)
Stop Plate Part # PL 7957A
I will pay something to be able to just...