• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. jetjockB747

    M939A2 A/C Compressor Mount Kit, Pass Side, Factory Serpentine Drive

    My first truck has had the AC installed for the last 18 months. Worth every penny down here in S. FLA. I've got the Red Dot compressor mount kit installed. I found the RD kit to be over-engineered and some what cumbersome.
  2. jetjockB747

    M939A2 A/C Compressor Mount Kit, Pass Side, Factory Serpentine Drive

    Looking forward to your posting. I've had an AC kit sitting idle for the last 2 years waiting for a mount kit.
  3. jetjockB747

    need transport for 3 M939 hoods

    Thanks for the heads up bud.
  4. jetjockB747

    need transport for 3 M939 hoods

    Need pickup and delivery of 3 palletized M939 hoods from Groveport, OH to SC. Dimensions are 79x42x59. Weight 300/pallet.
  5. jetjockB747

    M939 200 amp alternator upgrade

    Yes I did. The external regulator is mounted on top of the alternator and wired to it. It turns out the alternator in question is for a HEMTT. Too large for the M939. It has been returned. On a side note, I did find two of my Hawker batteries were at 11.5V. I have since removed them, and are...
  6. jetjockB747

    How do I get the creme that used to be oil out of the engine?

    You would need to disable the ignition. Drop a gallon of diesel in to the crankcase and turn the motor over a few times. Drain the diesel and service the engine with appropriate lubricant. Drive it a few miles, and change out oil.
  7. jetjockB747

    How do I get the creme that used to be oil out of the engine?

    I've used diesel in the past. On marine gas engines. It will attract the moisture in your crankcase and exit with most, if not all the crud.
  8. jetjockB747

    M939 200 amp alternator upgrade

    External regulator? This thing has the regulator bolted to the alt. Is there another box to this setup? Thanks in advance.
  9. jetjockB747

    M939 200 amp alternator upgrade

    After installing an RD AC unit on my truck, the stock 60 amp alternator has fallen short on amperage. The solution, a bigger alternator. I have recently acquired a Neihoff 14/28V 200 amp alternator to feed the electrical system on my M923A2. Does anyone know what and if, any electrical...
  10. jetjockB747

    M923 air conditioning a/c install project

    Haven't received the new alt yet, but I plan on upgrading the wires to lower gage. The pcb should handle the higher amperage....I hope. This Neihoff 4/28 200 amp alternator should drop in to the existing mount. I'll keep you guys posted.
  11. jetjockB747

    M923 air conditioning a/c install project

    I'll be installing a Niehoff 14/28V 200 amp alternator. I'm guessing that the additional amp draw to charge my 4 batts might be too much for a 60 amp alt. and the RD AC system.
  12. jetjockB747

    M923 air conditioning a/c install project

    For those considering AC installation in their M939s, be aware that the alternator will need to be upgraded to a 100 amp or >unit. I've suffered multiple electrical system faults due to alternator not liking the additional load. So far I've replaced the ABS ECU, the fail safe module, and the...
  13. jetjockB747

    M923 air conditioning a/c install project

    Hey over. During the ac installation process, did you allow the drier to sit uncapped for a long time? This would introduce excessive amounts of humidity into the system and reek havoc on the system. Your high side should not be above 300.
  14. jetjockB747

    Red Dot AC in the M939

  15. jetjockB747

    Red Dot AC in the M939

    :grd: AC installation is complete. Unit blows cold air as expected.
  16. jetjockB747

    Red Dot AC in the M939

    When choosing the location for the condenser, I wanted the unit above the water line. Down here in Florida we are exposed to hurricanes and torrential rains that accompany severe flooding. Placing the condenser in the cargo bed provides protection against the elements.
  17. jetjockB747

    Red Dot AC in the M939

    Red Dot. Makes the compressor mounting kit. It includes the bracket, pulley kit, fan spacer, belt, and all mounting hardware.
  18. jetjockB747

    Red Dot AC in the M939

    Here are the pics of the compressor mount, pulley kit, and fan spacer. The second pic shows the compressor pulley attached to flywheel. All parts are included in the kit.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks