Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I've been running 30% filtered veg oil in a number of trucks in the warm months here in Minnesota but I would like to run a heated seperate tank system in the future . Has anyone done this and if so will you tell me how to go about it ? Wolf
The Beast Is Alive
Thanks to all your help , the beast lives . The bottom piece of the plunger and it's clip lay at the bottom of the main housing once I pulled the head off . I snapped it back on and put it back together an WahLa - Fish-N-Chips , she lit up after bleeding the lines one at a...
Does anyone know the difference between the 5 and 10 KW Diesel generators ? This is the air cooled 2 and 4 cylinder . I am currious as to look at them the only difference is the engines and one skid is longer to accomedate the longer block . I am interested because I have a new 10 K engine and a...
I've had the top bolt off on the hydraulic head and turned the pump on and fuel gushes out of the hydraulic head . I have now gotten into the TM 9-2910-226-34 and have the switch question answered . To remove the hydraulic head it says to turn the cam to align the slot with the arrow . Which cam...
I have fuel to the pump . The think goes up and down . Looks like I'll need to pull the hydraulic head . I removed the shutoff switch and took it apart to clean it . Anyone know if the little thing on the back end of this unit is possitioned forward or to the back . In my frustration I failed to...
OK the plunger goes up and down . I have now manually injected fuel into the return lines . Anyone know the firing order ? I can try manually injecting into the injector lines .
Removed stop swirch cover . It moves freely . It is also centered straight up and down and moves to the rear . Not sure if that is correct . Have not found applicable TM yet . Removed center top bolt and tapped on the plunger . I don't think I moved it . I tapped it with a body hammer and a...
I think I have a faulty shut off switch on my injector pump . When my truck wouldn't start I found my lift pump to be non functioning so I replaced it . Now I have fuel to the pump but nothing to the injectors . Does any one have an exploded view of this injector pump ?
Can I fix the shut off...
Mine came with the spacer and the special bolts are just long bolts . I hope this works out for you all as it is so KOOL to get out and turn those big HONKEN KNOBS . It's like haven a FIST FULL OF DOLLARS though .
There was no price with the invoice . Here is my guess on the foreign trucks . They used Rockwell axles . So it may be a KIA RIO truck riding on Rockwell axles . This would explain why the KIA RIO hubs fit the Rockwell axle . These people could sell a lot of lockouts if the price were right . I...
Look here but don't give up on the price just yet . It proves they exist . Now we just need to find a way to get a reasonable price .
http://www.tellico4x4.com/index.php/cPath/2880_238_1835/sort/5a/page/1
Keep in mind this was an individuals auction on Ebay not a company . I just drove the truck around the house with no problemo's . I found the Kia Rio listing on some Rock Crawler site during a google search for Selectro's .
The invoice to the original buyer was for 07/07/06 Mile Marker Kalama Washington 98625 . I think that when Milemarker took over Selectro someone in the new head office omitted the designation for 2 1/2 ton Rockwell hubs or missmarked them as Kia Rio units . One guy I would talk to would tell me...
They are marked KIA RIO but they are the same as the Rockwell hubs . I checked with the factory before I bought them on Ebay . Just installed them tonight . Will try to run them Tuesday . In any case they went right on . The packing list reads 11167 item number and 1919 RIO . They are 8 Bolt and...