Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I ended up with "auto transport service inc. 1-800-523-7182" when I had mine picked up from camp shelby and sent to california. That was 7/19/04 ago.
They were contracted by "all american auto transport inc" www.aaat.com the salesmans name was Kurt I don't know if he still works there but he...
broken crank is a more common occurance than a timing chain. this is usually due to a harmonic balancer with bad rubber.
you could pull the glow plugs and check if the pistons are all pushing out air when you crank it.
these motors can be purchased cheap as good used take outs from the...
Only real issue I've ever had was a front spring eye bolt that rusted in the sleeve and I had to cut it out. Locating a new bolt was harder than I would of thought.
A new set of u-bolts is a must and should be tightened to spec with a good torque wrench. Relocating the brake lines would be...
I think the only mistake you made was telling a bunch of rigid coots on this site that you drove it home! keep on truckin! land of the free and home of the brave, or so I sometimes think!!
Man that thing sweet! It would almost be a shame to get it dirty!! "almost" :razz: Are you going to see how she handles out on the trails??
I am in the proccess of making my 97 H-1 drivetrain a mechanical set up, on my list is a mechanical waste gate and trans controller..
Would you...
I second the glow plug suggestion!! the fact that kicked the first time is an indication the plugs were almost gone..
use and ohm meter on the flat tang and one of the hex sides.. should get some resistance through it..
keep in mind summer is comming up and with global warming there will be plenty of melting faces and sweaty butt cracks going around!! Needs a few things but it's a start!
chevy C/K add on A/C unit - Pirate4x4.Com Bulletin Board
can you tell me what kind of flange is needed to to bolt the exhaust header on to the turbo manifold down pipe?
I have the 3" stainless pipe and muffler I need I just don't know how to attach it!!:oops:
oyy! don't get me started there. the $1400 ford dana 60 he sent me was completely trashed from the knuckles out. I figured I would replace the bushings and springs but the lower caps had rust holes "allowing water in" and wasting the lower taper bearings, most of the cap bolts sheared off and...
may get banned for arguing but whatever!! Do you really think a 20 year old 3 leaf pack is going to be able to hold a dana 60 where it needs?? if you can look at the pack from the side and see daylight through the layers of the spring pack "it prob needs to be replaced"
Not to mention the old...
that has nothing to do with my original post, I'd love to correct you but we are being monitored now and I would rather not be banned for something silly. that's all I can say about that..