Search results

I hooked up a manual gauge the other day and I had 70 psi on immediate startup and 50 psi at a very low idle. So the problem is just the gauge. So I have a manual one on the way. So I the seal just tired and can't take the rpm? I have been driving it under 2k and have had no leaks out the back.

I plan on getting the anti drain back filters for both my trucks. I try not to turn them off unless I have to. It makes me cringe how long it takes for the pressure to build. I am going to hook up a oil pressure tester I have at my shop to it and just make sure those readings or correct. If...

It is not trans fluid it is engine oil. When I take if for a ride today I will see what kind of flow I am getting out of the breather. This motor seams to run better than our other one and it also smokes less when when you drive it. The oil pressure gauge reads lower than the other one I...

The guy I bought the truck from owns his own diesel service shop and I also have a shop and work on diesels. I did check the oil before we left and it read to the full mark. I have not checked the trans fluid level but it is definately oil that was leaking. I have been driving it for a few days...

I recently bought a bobbed Deuce. I drove it three hours home and ended up developing a rear main seal leek. I driving just under read line doing 50-54. When I would stop and drive around a parking lot it would stop. I tried driving a little slower at around 2k and still had the rear main...