Search results

Kenny, I think I am following you but must ask, are the check valve you refer to and the quick connect the same thing. It would seem that if I locate the female quick disconnect off my M/C cap, it would not be a factor when nothing is connected to it and the ball valve at the reservoir is open...

Here is another option I thought of doing. I have assembled the fitting on the M/C cap for photo purposes but they would be added as allowed during installation. Deuceman51 and I hashed this over and he was concerned about dirt infiltration into the female connector. I have a rubber boot to...

Thanks for the recommendation. Would it work if I install a ball valve below the reservoir followed by a tee. Off the side of the tee I would install the female connector and off the bottom of the tee I would connect the hose to the M/C. On my Bleeder I would install the male connector after...

I was unable to find an answer to my question via search so here goes! I purchased the components for my remote brake reservoir from Wilwood Engineering. I would now like to see if I can make it compatible with my power bleeder. I checked with Wilwood and they do not have any type of cap to...