Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Finally decided to troubleshoot my glow system. I had replaced the controller, relay, and plugs with known good ones out of the other truck. I still had an intermittent problem. While I was checking power/continuity/ground on the glow control connector I noticed the female terminals where the...
@paraclete comes,
I need some seatbelts in a bad way.
I want to make sure I get the right ones, could you please provide the part number and/or NSN?
Thanks.
Aux Power and Switch Panel
This weekend I built an aux power panel and switch panel. The fuse block I built is mounted on the right side of the heater box, just near the top (visible when you open the glove box or lay on the passenger floor. All wires stripped, crimped, soldered, and...
It was mostly a prototype, now I have an idea what I'm doing I'll be fabricating a center console. The civy plastic ones look good but aren't really that functional. A Metal box with holes, bars, brackets, and other goodness will be much more useful.
Overhead PALS/MOLLE Compatible Rack
This weekend I crafted up an overhead rack out of aluminum angle and bar stock. I used 3/4" (1/8" thick) angle, 3/4" x 1/8" flat bar stock, about 36 rivets, my bench vise, hand drill, jigsaw, and RivNut tool. Primed with zinc chromate and painted with...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!