Search results

Is your regulator good and did you use the correct ports?

Give us a pic of your setup so we can help figure it out

Yes it would work.

I'm not offended in any way I'm just letting others know with our experience it works better after the regulator IMO. We built the first one months before I ever made the post and tried it with the ball valve before the regulator and found it's more user friendly to have the valve after the...

it will work that way but will be a pain to get your desired pressure without a bunch of peckering around. I have built and used the system. You build it and use it then tell me how much of a pita it is to get your desired pressure with your setup. This is a case where experience over rules...

That drawing would work but you need a ball valve after each regulator so the system isn't pressurized all the time.

Most regulators have a check valve that won't allow back feed

If you put the regulators after the ball valves its much harder to get the psi set where you want because the regulator won't read the set pressure till that much air is in the line. With the regulator before the valves it shows the full pressure you have set it too. We tried it with ball valve...

Yes they are 3/8"

Correct. There is 2 lines into the control box on the floor one is the feed from the truck the other is the line to the ctis system. the one with the water separator is the feed in that you hook to the regulator the other hook to the outlet of the T.

I don't have a pic of the one I built because it's in a truck that's not here so credit to the pics owner. (edit) I found the owner of the pic is tjhuffy and he also did this setup to his LMTV earlier this year. This is how to bypass the ctis controller to make it a manual system if you are...