Search results

I got the head lights working lol it was the loose nut between the steering wheel and seat. No turn signals yet they get brighter when turned on but no blink. I checked voltage going to the blinker flash module im getting voltage to it. I ordered a new one. Installed the rear lights, and got the...

Ok thank you

Hi guys I’m finishing up the 818. I seem to have a possible light issue. No turn signals or headlights. Now I do not have the rear lights connected is that why kinda like an open? My front markers light but don’t blink. Black out lights on markers work. But no headlights at all now I haven’t...

Hi guys I got a question will the PTO off of a M51 work on a M817? Wasn’t sure if the Multi fuel 5 tons transmission was the same as a 800 series. A friend of mines 817 the PTO broke off the transmission but he has a M51 and was curious if he could swap. I told him I would ask you guys. Thank you

Thank you US6x4 for the pic.

Good morning. I installed the In cab heater in the 818. But I can’t figure out what to power the switch too what number the TMs I looked at didn’t show it. And the old truck wires were cut. I saved what looks like a 2 way splitters from the old truck. I don’t think I can just pick one and hope...

Hi guys after watching some videos and looking at TM, I got a question about my winch I have it installed on my truck M818 minus the drive shaft. I got the engage and drum lock to move. But with the drum lock out out and lever in the engage should the drum move backwards as to wind itself in if...

Hello everyone hope everyone is staying warm. I got a question. I’m trying to remove the PTO from my parts truck, I can get most of the nuts off the studs except for one it’s right behind the transmission I can get a open end wrench on it but can’t turn it with out hitting the tranny. Do I need...

Santa brought me a cool present. Merry Christmas

Worked on taking more parts off the donor truck today. Trying to remove parts and pieces that someone or myself might need before I load it up for the local scrap yard. Merry Christmas to everyone.

Got some work done on it block heater winch controls fuel tank cleaned and reinstalled. Still have work to do lol.

Oh ok that’s interesting. Thanks for the help

It was under the passenger seat I have no use for it if someone wants it message me. I would put it in classified but I don’t know what it is lol

Does anybody know what this is?

It just let go. Then surprises in the reservoir tank

Got the fuel tank back on filters changed. Trying to drain the radiator valve is open completely but it is only dripping any ideas

Hi guys, I know this isn’t the place to list things, So I’m letting you know I’m putting an ad up in classifieds for 5 ton parts. Still working on the old girl. Trying to clean rust from the one tank, installing engine block heater, fluid and filter change, one brake line needs fixed, couple...

Happy Veterans Day to all the Veterans on here I’m sorry day late. Well I started out today removing my rear electrical harness from my parts truck, and everything was going good until I got to the trailer plug hole. The hole was just a smidge too small for the gold threaded cap to fit through ...

That’s nasty. I’m getting ready to do all my fluid changes to the 818 after I get my exhaust put back on muffler and lower pip were shot tip was good lol. I peaked in my tanks not sure what’s in it but it’s getting drained and new fuel being added and fixing a smashed fuel line. Along with PS...

The one in the garage runs the other I bought for the winch it has the engine in it but is missing the injector pump and supposedly won’t turn over. But it has more options than the running one lol. So I might be moving some of those options over we will see.