RAYZER
Well-known member
- 3,380
- 58
- 48
- Location
- sanford/florida
You notice the difference more at lower speeds, hearing protection is still required at higher speeds. Imo.
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Deuce muffler option
- Thread starter Dore1dog
- Start date
- 2,088
- 621
- 113
- Location
- Orlando, FL
I put a Walker Big Truck muffler on my Deuce W/D turbo. It made it quiet enough to drive around town without ear plugs. Over about 45 MPH the rest of the drive-train is singing and howling so you still need hearing protection on the highway.
- 4,210
- 37
- 0
- Location
- Las Cruces, NM
3db down = half as much power when dealing with RF, not sure if this applies to sound, but if it does. . .
I put the same muffler (moroso) on my Deuce much nicer.
Last edited:
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
If I had to guess the aero muffler reduced sound by 3-4db. As stated before it doesn't seem like much but the way the decibel system works that is a significant reduction in sound. If I was driving around town muffs are now unnecessary. On the highway I still will wear them. Only now because of the drivetrain whine. The engine still isn't too bad at wide open but that howl from the drivetrain wears on your ears after a while.
I plan on insulating my cab in the near future also. That should really help with the drivetrain noise but I'm not expecting any miracles.
I plan on insulating my cab in the near future also. That should really help with the drivetrain noise but I'm not expecting any miracles.
RAYZER
Well-known member
- 3,380
- 58
- 48
- Location
- sanford/florida
Welldigger, are you going to put the mesh guard back on?
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
Probably not. It won't fit around the muffler and it really doesn't look bad without it. Once everything is painted it really won't be noticeable. But nothing is set in stone yet.
Jeepsinker
Well-known member
- 5,341
- 329
- 83
- Location
- Dry Creek, Louisiana
Just make one man, expanded metal is cheap enough, and you are obviously a capable fabricator.
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
True, making one would be easy enough. But honestly with the muffler there I think a big shroud would look gaudy. I prefer a much simpler clean look. Not to mention where the stack comes out on the deuce I can't really see how you would touch it. My shroud was mounted up pretty high already for some reason and I have never burned myself on it. Of course now that I bragged on myself thats the first thing I'm gonna do lol.
ducer
Member
- 297
- 1
- 18
- Location
- Ober, indiana
With the large walker muffler I can have a normal conversation at highway speeds. But boy do you sure notice other noises in the truck!
Nothing I need hearing protection for though. And yes it is a flow through design and it seems built in resionator also.
Denny
Nothing I need hearing protection for though. And yes it is a flow through design and it seems built in resionator also.
Denny
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
I hear a lot of good things about the walker. Didn't know it was a flow through design. Good to know.
Lieutenant Dan
Member
- 862
- 6
- 18
- Location
- Reading Pa
Do you have a part number on the big walker muffler?
Blendmaster2002
Active member
- 369
- 74
- 28
- Location
- Hesperia, California
Well here is an install thread I did on the Big Walker muffler.
Walker 21470 Muffler install
http://www.steelsoldiers.com/showthread.php?98832-Walker-21470-Muffler-install&referrerid=19939
Lieutenant Dan
Member
- 862
- 6
- 18
- Location
- Reading Pa
Awesome that the one I was hoping it would be, I just wasn't sure if it was long enough. They are on amazon for $65 prime free two day shipping.
Greywolf54
Member
- 41
- 3
- 8
- Location
- Willow Springs, Missouri
Installed the Donaldson, in cab decibels went from 99-101 down to 89-94. Nice at $52, thanks to all of you doing the research.
brianp454
Member
- 572
- 11
- 18
- Location
- Portland, OR
Here's my summary of available mufflers:
brianp454
Member
- 572
- 11
- 18
- Location
- Portland, OR
Here's my summary of available mufflers:
View attachment 472856
| Manufacturer | Part Number | Inlet | Outlet | Body Dia. | Body Length | Overall Length | Price | Notes |
| Aero Exhaust Turbine | AT3535 | 3.5 | 3.5 | 6 | 12 | 20 | $ 100 | Straight thru design twist baffle, polished stainless |
| Aero Exhaust Turbine | AT3535XL | 3.5 | 3.5 | 6 | 18 | 26 | $ 120 | Straight thru design twist baffle, polished stainless |
| Dynomax Race Bullet | 24247 | 3.5 | 3.5 | 5 | 12 | 16.5 | $ 70 | Glass-wrap perforated tube, stainless |
| Dynomax Ultra Flo | 17224 | 3.5 | 3.5 | 6 | 16 | 21 | $ 75 | Glass-wrap perforated tube, stainless |
| FLO-PRO Twister F4 | 41288 | 3.5 | 3.5 | 4 | 12 | 18 | $ 60 | Spiral design |
| FLO-PRO Twister F4 | 41788 | 3.5 | 3.5 | 4 | 17 | 23 | ? | Spiral design |
| FLO-PRO Twister F5 | 51288 | 3.5 | 3.5 | 5 | 12 | 18 | $ 72 | Spiral design |
| FLO-PRO Twister F5 | 51788 | 3.5 | 3.5 | 5 | 17 | 23 | ? | Spiral design |
| Flowmaster Pro Series | 13512100 | 3.5 | 3.5 | 6 | 12 | 19 | $ 150 | Straight thru design, stainless |
| Flowmaster Pro Series | 13516100 | 3.5 | 3.5 | 6 | 16 | 23 | $ 180 | Straight thru design, stainless |
| Moroso | 94052 | 3.5 | 3.5 | 4 | 12 | 16 | $ 60 | Straight-through baffled, steel |
| Moroso | 94056 | 3.5 | 3.5 | 4 | 12 | 16 | $ 106 | Straight-through baffled, stainless steel, olished |
| Patriot Exhaust | H3840 | 3.5 | 3.5 | N/A | N/A | 12.5 | $ 36 | Insert, louvered core |
| Patriot Exhaust | H3843 | 3.5 | 3.5 | N/A | N/A | 11 | $ 21 | Insert, auger design |
| Walker RV \ Donaldson | ? \ M070050 | 3.5 | 3.5 | 7 | 18 | 26 | $ 50 | Perforated tube |
| Walker RV \ Donaldson | 21470 \ M070028 | 3.5 | 3.5 | 7 | 14 | 19.75 | $ 50 | Perforated tube, Replaces Part Number M353570 |
View attachment 472856
Last edited:
peashooter
Well-known member
- 1,038
- 204
- 63
- Location
- Hanover, minnesota
Just a quick correction on the above Donaldson M070028 spec (I have this one) its body lengty is 14" and overall is 19-3/4". Thanks for putting the comparison together Brian!
https://dynamic.donaldson.com/webc/WebStore/search/item_detail.html?section=10210&item=23070
https://dynamic.donaldson.com/webc/WebStore/search/item_detail.html?section=10210&item=23070
| Inlet Diameter: | 3.50 Inches (89 MM) |
| Outlet Diameter: | 3.50 Inches (89 MM) |
| Body Diameter: | 7.00 Inches (178 MM) |
| Body Length: | 14.00 Inches (356 MM) |
| Overall Length: | 19.75 Inches (502 MM) |
| Rated Flow LR: | 719.00 CFM (50.80 CMM) |
| Rated Flow MR: | 1017.00 CFM (177.80 CMM) |
| Rated Flow HR: | 1245.00 CFM (25.40 CMM) |
| Back Press LR: | 1.00 In Hg (25.40 MM Hg) |
| Back Press MR: | 2.00 In Hg (50.80 MM Hg) |
| Back Press HR: | 3.00 In Hg (76.20 MM Hg) |
| Attenuation: | 10-15 dBA |
| Primary Application: | OFF ROAD APPLICATIONS |
| Product Type Description: | MUFFLER, ROUND, STYLE 1 |
| Price Type: | E |
Attachments
Last edited:
brianp454
Member
- 572
- 11
- 18
- Location
- Portland, OR
You're welcome peashooer! The only thing I have against the smaller Donaldson is a concern about how restrictive it is. Can anyone speak to the design details of the short Donaldson? Does it have an obstruction inline or is it really a straight-thru perforated tube (is what they publish really true)?
peashooter
Well-known member
- 1,038
- 204
- 63
- Location
- Hanover, minnesota
I don't have pics but I remember a dome shaped obstruction in it (so not straight through unobstructed). It wasn't a total block though, but enough to deflect the sound. I'm pretty fussy and I think it's a very quality muffler that installed without modification.... But I haven't seen all the others either so do your homework (as brianp454 obviously is) if you are in the market for one. I just really wanted to stay away from the giant walker muffler and glass packs.