• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Bedford MJ or Bobbed Deuce

eaw46

Well-known member
Steel Soldiers Supporter
I have been thinking of getting a Bobbed Deuce but found a British Bedford MJ and it might work for me. Its about the same size as a Bobbed Deuce and has a 6 cly diesel motor and should work for me. I know parts will be a little harder to get but not impossible and I have to import all my M35 A2 parts anyway. I would like a shorter truck that will still tow a good load and would rather not wreck a good Deuce by bobbing it if this would work out. Has anyone got any experience with one of these trucks? Any comments or ideas?
 

davidkroberts

Active member
1,453
22
38
Location
west tennessee
I have some experience with the M35A2 :roll: . The Bedford has a decent rep with the troops. What can you get the parts for and from who do you have a link for them
 

eaw46

Well-known member
Steel Soldiers Supporter
Here is a couple of pics of the truck and a link for the UK parts guy.

Crouch Recovery | Military Vehicle Specialists | Parts | Supplies | UK

The parts have to come from the UK but as I said most of my parts have to come from the US anyway so it is not much more time and money for me. The trucks look like a flip cab but are not there is access to the motor but its not all that great and that can cause trouble. I can get this truck for about 5K and it is 30 miles from me and runs great with new tires. It costs me 4K for a M35A2 and then almost as much to get it here depending on where it is and then I would have to bob it or buy a bobbed one that would cost me at least 6K and another 2 to 3 K to bring it here. I love my Deuce but this might work for me. Eddy
 

Attachments

trucknut

Member
46
2
8
Location
winnipeg, manitoba
The bedford was the truck of choice for tour companies doing overland expeditions in Africa in the 70's &80's . They were relable and fairly simple to fix if broken. Is it a lefty or a righty ? Better view off road, just don't hit anything too big!
 

eaw46

Well-known member
Steel Soldiers Supporter
Its a left hand drive and in good shape. It is a bit like my 404 but no portal axles and no where near the wheel travel but does have a lot more motor for the towing I want to do. I am just looking for some comments from anyone who has experience with one. Thanks Eddy
 

m880 unimog

Member
295
10
18
Location
england
hello from england-these trucks are good because they are tough-there are better off road machines,and almost everything is faster,but you really need to try hard to break them,they come from a long line,'squady proof':)
having dealt with david crouch for over 15 years,i can say there is no-one better to buy a mv from in england.
if you want an easier life,you will want a turbo charged engine-and then you will REALLY need power steering.if you plan on towing any load with a non turbo MJ-avoid hills!
personally i,d buy a TM- the k500 turbo engine RIPS!!!
I HAVE OWNED AND DRIVEN BOTH VARIENTS.
ah! caps lock- let me know if can help from this end...oh,and all the service parts are common stuff we get from the 'crosslands' catalogue,filters,and such
 
Last edited:

eaw46

Well-known member
Steel Soldiers Supporter
Thanks for all the comments. I would love a turbo or more power but I do not have much choice in the truck as this is the one that is here. I think I will pick it up and give it a try and see how it tows the half track. I can then use the M35 to tow the Dukw. I live in a place so flat you can watch your dog run away for 3 days so hills are not a problem. I do not expect to tow anything very fast or far just want to get them around to local shows and sites. The max I would tow them would be about 100 miles. I will post on this thread later when I see how it all works out. That will be a few weeks as I am not going anywhere with the 4 ft of snow on the ground that we have right now. Eddy
 

m880 unimog

Member
295
10
18
Location
england
you have a DuKW ?:drool: -i have had such good fun swimming accross europe in various amphibious MV,s!
amphibious MV,S are hard to beat for fun.
good luck with the MK-let us know how it goes:)
 
Top