Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
It’s definitely noticeable, more so when I put it on the back side of the doghouse! I plan on putting down a piece of plywood on top of it as well as a center console that will also be insulated. Definitely recommend the Dynamat!
Sent from my iPhone using Tapatalk
None whatsoever, I would recommend buying the good stuff, Dynamat, conforms very easily. I did use a handheld torch to help “fuse” it once I was finished.
Sent from my iPhone using Tapatalk
Changed my brake fluid, DOT4, on my m998. The fluid keeps changing colors. Sometimes has a tint of red, sometimes a tint of blue green. I’m guessing the red is old rust, not sure about the BLUE. Any ideas?
Sent from my iPhone using Tapatalk
Dropped the gas tank because I was losing pressure and had a leak. Replaced the lines and clamps, tank was pretty clean overall. Replaced the fuel pump ($40) as well and brand new starter ($450 ouch!).
While up on the lift, found out the inner/outer tie rod on front right is shot. Any...
It’s difficult to give you a number without seeing your truck. Plus, I’d like to do it here at my shop so that it’s done right.
Sent from my iPhone using Tapatalk
Fabricated myself, got a shop in Staten Island New York. Started working on a friends, now I’ve got a few of my own. Thank you!
Here’s another hard top I’ve done recently
I hope to fabricate these things all day long!
.
Sent from my iPhone using Tapatalk