- 1,990
- 3,147
- 113
- Location
- Pepperell, Massachusetts
MEP-802A & MEP-803A Voltage Regulators
Replaces TRC 19580 88-21063 6110-01-363-0492
Features include:
· Replacement for your defective or missing Voltage Regulator... or to have a spare on hand
· Works in generators that have defective Quad Windings!
· Supports the 802/803's Field Flashing operation
· Input and output fuse protection
· Works with or without the "Fuse Mod" (Fuse Mod is not needed)
· Virtually all components can be replaced for maintainability
· Includes new pre-wired front panel voltage adjustment potentiometer
· New mounting hardware, wire labels zip ties & instructions included for installation
· 1 year warranty
For those needing to run their 802A or 803A in 3 Phase with 230 V load the Voltage Regulator can be adjust to 230 volts phase to phase (and more).
I personally assemble each of the Voltage Regulators.
Once built each Voltage Regulator is installed in my MEP-802A, adjusted and load tested to assure a defect free unit.
Ordering Information
Cost: $250 Includes USPS Priority Shipping in the US & Puerto Rico
PayPal & Checks accepted. Check preferred.
To order email me at: kurtklopp@gmail.com or PM me on this forum
Be sure to include the following information:
1) Name & Mailing Address
2) Payment Method
4) PayPal email address if using PayPal
Kit
![Kit.jpg Kit.jpg](https://www.steelsoldiers.com/data/attachments/558/558777-670525f6a0bc4ff7094c5f9678f45260.jpg)
Installation Hardware
![Hardware.jpg Hardware.jpg](https://www.steelsoldiers.com/data/attachments/558/558778-2a8b1241b193d2a7dcc2135dba4e0e14.jpg)
New Voltage Adjust Potentiometer
![Potentiometer.jpg Potentiometer.jpg](https://www.steelsoldiers.com/data/attachments/558/558779-f4490fe3563ad05f25484d9e553d1caa.jpg)
Installed
![Installed.jpg Installed.jpg](https://www.steelsoldiers.com/data/attachments/558/558780-734c28da459cf51bc0015f9edc6caedc.jpg)
Replaces TRC 19580 88-21063 6110-01-363-0492
Features include:
· Replacement for your defective or missing Voltage Regulator... or to have a spare on hand
· Works in generators that have defective Quad Windings!
· Supports the 802/803's Field Flashing operation
· Input and output fuse protection
· Works with or without the "Fuse Mod" (Fuse Mod is not needed)
· Virtually all components can be replaced for maintainability
· Includes new pre-wired front panel voltage adjustment potentiometer
· New mounting hardware, wire labels zip ties & instructions included for installation
· 1 year warranty
For those needing to run their 802A or 803A in 3 Phase with 230 V load the Voltage Regulator can be adjust to 230 volts phase to phase (and more).
I personally assemble each of the Voltage Regulators.
Once built each Voltage Regulator is installed in my MEP-802A, adjusted and load tested to assure a defect free unit.
Ordering Information
Cost: $250 Includes USPS Priority Shipping in the US & Puerto Rico
PayPal & Checks accepted. Check preferred.
To order email me at: kurtklopp@gmail.com or PM me on this forum
Be sure to include the following information:
1) Name & Mailing Address
2) Payment Method
4) PayPal email address if using PayPal
Kit
![Kit.jpg Kit.jpg](https://www.steelsoldiers.com/data/attachments/558/558777-670525f6a0bc4ff7094c5f9678f45260.jpg)
Installation Hardware
![Hardware.jpg Hardware.jpg](https://www.steelsoldiers.com/data/attachments/558/558778-2a8b1241b193d2a7dcc2135dba4e0e14.jpg)
New Voltage Adjust Potentiometer
![Potentiometer.jpg Potentiometer.jpg](https://www.steelsoldiers.com/data/attachments/558/558779-f4490fe3563ad05f25484d9e553d1caa.jpg)
Installed
![Installed.jpg Installed.jpg](https://www.steelsoldiers.com/data/attachments/558/558780-734c28da459cf51bc0015f9edc6caedc.jpg)
Last edited: