- 370
- 673
- 93
- Location
- Mansfield, PA
There is a post on the 503 asking about a gap on the mid crossmember outer end repair part. I have an end piece that I'm reverse engineering in order to reproduce as part of our 151 body panels. I also have a NOS mid crossmember. I did a test fit to the crossmember, my A1 and A2 and they all have the same gap which is around .4". Am I missing something? This excessive gap doesn't seem correct to me.
![20231120_170527.jpg 20231120_170527.jpg](https://www.steelsoldiers.com/data/attachments/666/666336-013c8b4834e13b4e2a33c8eefafb0e6e.jpg)
![20231120_170531.jpg 20231120_170531.jpg](https://www.steelsoldiers.com/data/attachments/666/666337-e761af67d16db78caf1f22ae6df223bb.jpg)
Guy
![20231120_170527.jpg 20231120_170527.jpg](https://www.steelsoldiers.com/data/attachments/666/666336-013c8b4834e13b4e2a33c8eefafb0e6e.jpg)
![20231120_170531.jpg 20231120_170531.jpg](https://www.steelsoldiers.com/data/attachments/666/666337-e761af67d16db78caf1f22ae6df223bb.jpg)
Guy