• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Need Help on M151A2 re-wiring with Heater Connection Switch

je

New member
3
0
0
Hello Gents,


Well I got myself into a pickle
. I cannot find anything or any paper on the heater switch connection. While doing a re-wire install on my M151A2 I cannot figure how to get this switch hooked back up correctly.



Here is what I have:



THE HEATER SWITCH HAS (3) WIRE NUMBERS:

(1) #11 on the left

(2) #11 in the middle with a spliter to a male #12 and female #12.

(3) #11A with a wire going to the fan and a spliter with female #11A



I THINK A RESISTOR (THE LONG SPRING) ON THE LEFT SIDE WALL:

(1) Top male wire with #s 207, 122, 55, 415 all in a row.

(2) Bottom male wire #11.



THE CIRCUT BREAKER ON THE SIDE PANEL:

Has two female connectors.



I need help in wiring this back to correct connections.......



Thanks,

Jerry
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks