Search results

Good Evening All, I have a MEP-002A mounted on a 3x5 garden trailer that I normally keep inside my garage. I would love to be able to run it in the garage due to the noise level and not wanting to unreasonably disturb my neighbors. While doing research online I found out that the M85 has 2...

Hello All, I'm trying to verify that I have properly troubleshot my DC Charging System. My measurements are: Resistance Between Stator Leads (disconnected) - 0.9 Ω Left hand lead to ground - OPEN Right hand lead to ground - OPEN Stator disconnected and engine running - 43.2 VAC DC Voltage...

Good Afternoon All, So I ordered a WIX 24770 (adapter base) and a WIX 33405 (filter) to replace my the fuel/water separator on my MEP-002A as the original filter was missing and cost more than the replacement parts. Well today I received it and much to my surprise it doesn't just bolt on (some...

Hello All, Today I noticed that when R1 is fully clockwise the output voltage is only 115/230VAC (on 120/240 1 phase). The TM says "Voltage readings should be as follows. Voltage adjust range shall be between 205 and 220V for the 120/208V, 3 phase, 4 wire connection. Between 114 and 126V for...

Hello All, Has anyone here ever added a 30-Amp 125/250-Volt Black 4-Wire Grounding Convenience Outlet directly to their MEP-002A or MEP-003A? I'd like to add one to mine so that I don't have to use the TB1 connections. My thought was to connect a piece of 10/3 SJ00W to the same terminals...

Does anyone know at what level the Aux fuel pump is supposed to cutoff? Right now it looks like mine cuts off at just under 13/16 full. I can't find it in the pubs so I figure I'd ask you guys. Thanks in advance

Can anyone with a PU-751 tell me what the distance from the top of the MEP-002A (without ASK) and the bottom of the bows is? I have a MEP-002A (without ASK... for now) mounted on a 3x5 garden trailer and would like to make a cover for it. I want to ensure that I give proper clearance for...