ballencd
Active member
- 169
- 62
- 28
- Location
- Columbus, NC
I was told this was a transfer case PTO off an M35 but it is too big for the back of the transfer case.
Anybody know?
Anybody know?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Anybody know what this is or goes to? 2.5 ton, 5 ton, something else?
- Thread starter ballencd
- Start date
AMGeneral
Well-known member
- 2,301
- 112
- 63
- Location
- Connelly Springs, NC
PTO for a 5 ton transfer case, specifically for a 5 ton wrecker.
ballencd
Active member
- 169
- 62
- 28
- Location
- Columbus, NC
Thats what I was thinking. : (
Does it runs all the time when the transfer case is turning?
Thanks for the info. I guess I will try to sell it as I don't have a 5 ton! : (
- 3,216
- 388
- 83
- Location
- Tonopah, AZ
I do not think it is for the M939 wrecker, does not look like the one on my wrecker.
- 10,194
- 5,943
- 113
- Location
- Camp Wood/LC, TX
Agree its for the older 5 ton, not 939 series. B&M picture is of a 2 1/2 ton PTO though!
AMGeneral
Well-known member
- 2,301
- 112
- 63
- Location
- Connelly Springs, NC
Sorry for my vague answer, wrecker PTO for a M809 or M39 series wrecker, yes it does turn all the time, it does not disengage.
ballencd
Active member
- 169
- 62
- 28
- Location
- Columbus, NC
Thanks guys for all the answers. It's not going to do me much good so I will try to sell it. ballencd