• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Benjamin Moore Rock River OD paint Brush or Spray??

joediveguy

Member
239
2
18
Location
Front Royal, Northern VA
Okay, so after searching posts and after deciding on the BM RR paint, I am ready to paint. I have a tailgate that I have prepped and started to paint. The bed side I primed and brushed on bed liner. Then I brushed on a couple coats of the RR paint. It looks ok, but it has brush marks, no big deal as it is on the inside and is textured because of the bed liner.

Will those brush marks blend in or should I have used a spray gun.

I have a gravity fed HPLV spray gun but was told by the BM rep that the paint was too thick and would need to be thinned for it to shoot through the gun.

I like the brush because I can get it on thicker, however, the spray gun would seem easier to apply and would be more uniform.

For those that have done it, what are your thoughts, Brush / Roller VS Spray Gun?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks