• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

DENTON NC Buy/Sell Thread 2022

Blake

Active member
322
61
28
Location
Opp, Alabama
I am planning on attending and can bring if there is any interest:

NOS autolite waterproof spark plugs (2245) for your stock m151, m37, m38, m38a1.... Made in USA: $25 each
PRC 25 with AM2060 power supply: $350
M116A2 trailer with MEP-003 diesel 10KW generator. New fuel filters. Engine is brand new, less than 1 hour run time with paperwork (I installed new from crate). No trailer title. Civilian taillights and RV light plug: $3500
1.5KW military gasoline generator. 120/240. Runs: $250
M16 rifle storage rack, aluminum, used: $100
Military light set in footlocker with cords/sockets: $100
Large military snatch block with loop on top: $125
M1008 CUCV Gas tank complete, used
 

Attachments

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,807
736
113
Location
Liberty Hill, SC
I am planning on attending and can bring if there is any interest:

NOS autolite waterproof spark plugs (2245) for your stock m151, m37, m38, m38a1.... Made in USA: $25 each
PRC 25 with AM2060 power supply: $350
M116A2 trailer with MEP-003 diesel 10KW generator. New fuel filters. Engine is brand new, less than 1 hour run time with paperwork (I installed new from crate). No trailer title. Civilian taillights and RV light plug: $3500
1.5KW military gasoline generator. 120/240. Runs: $250
M16 rifle storage rack, aluminum, used: $100
Military light set in footlocker with cords/sockets: $100
Large military snatch block with loop on top: $125
M1008 CUCV Gas tank complete, used
Hey Blake, what are you asking for the m1008 tank?

Also, did you change your dash out yet? I'm still interested in your old one.
 

Oxyacetylene

Active member
Steel Soldiers Supporter
518
179
43
Location
Stoneville, NC
Coleman's used to have them, but the only ones I see on evil-bay are $500 plus shipping. Want this one for $250? If I don't get there, I'll send by Adam and in any case I'll try to have it near Cabell's MKT so it can be found easily.
Looks to be in good condition. Is that just cracking paint on the bottom of the desk surface? As long as it's in good condition then send it on. I am thinking one of those would make a decent work area for the enclosure.
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
So, I'm going to offer up a few heavier goods from Microjeeps collection. This stuff must have a firm commitment before I'll load it. 3 command post tents. One I doesn't have walls, one does and the 3rd one is unused. I have not put my eyes on the NOS poleset but I'm sure I'll find it. Prices will be $450 for no walls, $750 for used with walls and $950 for NOS. Also have an M416 trailer. Was freshened up by Zout for Papabear along with the M151A2. This trailer has a replacement back panel. $1500. There is also a Converto trailer. Probably restorable but looks like it's been sitting since the Viet Nam conflict. $450. I'll do my best to figure all this stuff out but I'll be going back and forth to ATL a bunch, my sister in law just got a new kidney. All praise be to God. There is so much stuff to go through.
 

nayrbrellim

Active member
109
177
43
Location
Reidsville, NC
Looking for seats for m900 series 5 ton, anything other than the stock seats. Have thought about just keeping the spring ride and putting something like a commanders seat in it and putting a bucket seat on top of the battery box.

Also, looking for bows and cover for the M105 trailer bed that I have on my bobbed 5 ton.

Looking forward to seeing everybody at Denton.

thanks
 

jkcondrey

Active member
Steel Soldiers Supporter
317
140
43
Location
Rutherfordton, NC
I have an 1152 parts truck with many items available on it. Can’t guarantee I can get everything off in time but I can do so before and after Denton. I do have a booster for an REV truck I got by mistake. NOS, orange studs on master cylinder side. 200$ obo. 998 front drive shaft, NoS, but front grease fitting on slip joint needs repair, 40$ obo. Will only be down Saturday. I’m looking for two front soft doors, green or camo for hmmwv. PM me for anything. Thanks
Joe
 

art

Active member
250
28
28
Location
Northern N.J.
For Sale:

Frame for Crew Tent, Complete, with Bag & Spare Parts $75 - Sold
40389B5F-E9FE-4AB9-B0B8-64268C3FA816.jpeg 32312B16-E9F1-4A50-BB16-803248C0EE58.jpg

2 End Sections, (vinyl) -New in Box- for 16 x 16 Expandable Frame tent
11485AFA-80B5-4C1E-91B0-9E28288A26BC.jpeg 662B1B1D-A4FF-43D3-90A6-0EC06B369615.jpeg0C5A1091-74E4-4883-8E62-2FDC906FFB70.jpeg EC77C253-C71F-44C1-BAD4-C55C9BCEBDCB.jpeg

Mermites, -(Insulated Food Container), Parts & Complete

PadLock Sets, Keyed alike
Thanks
Art
 
Last edited:

Oxyacetylene

Active member
Steel Soldiers Supporter
518
179
43
Location
Stoneville, NC

TacMac2012

Active member
182
135
43
Location
Wallburg, NC
I am bringing various LMTV and HMMWV parts. Not sure what I will load up between now and when I leave though. I have a LWS if anyone wants one, may bring it regardless.

New in crate IbisTek tow bar with all accessories $1,000
NEW Max Ax kits (ax, shovel, etc). $150 each (qty 6-8)
NEW 12 ton hi-range bottle jacks (part number D-51014 if you want to look them up on eBay) $120 each (qty 8-10)
Scepter Fuel cans $60/ea (qty 5-10?)
NOS HMMWV CV shafts (not sure I will bring them all)
Also bringing the Harley Davidson MT500, against my better judgement I have decided to put it for sale. I just don't need 4 motorcycles! Need to sell two....

Who knows what else. I will be driving the MTVR dump truck/tag trailer.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks