Flasher failures

[Cleveland Iron]

Jon, this is the easy method, only one diode and a couple of splices. Doesn't effect anything else, just adds the buzzer signal when your turn signals are on..

I went a different way... I added a Mallory sonalert and a potentiometer for volume control. The high pitched tone is easy to hear and I won't have to clean my pants after I realize it isn't a brake problem...

 

[cranetruck]

Bjorn, Can you provide some specs on the diode? I'd like to do this mod, and your flasher mod also.
jonathan

The buzzer is a low current device and an 1N4003 (1amp/200volt) will do fine.