• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

HT roller

battlecr

Active member
282
49
28
Location
Eugene, Oregon
Finally completed a project that I wanted to get on Zelda my 1942 M3 Halftrack. Got an original roller on to replace the dummy PVC pipe I had been using.Used clamps that I built from the plans in the manual. It was a fun project.

Don G.
 

Attachments

battlecr

Active member
282
49
28
Location
Eugene, Oregon
Finally completed a project that I wanted to get on Zelda my 1942 M3 Halftrack. Got an original roller on to replace the dummy PVC pipe I had been using.Used clamps that I built from the plans in the manual. It was a fun project.

Don G.
Started on the radio wiring in the halftrack. i have the installation manual so should an interesting project.

Don G.
 

Attachments

battlecr

Active member
282
49
28
Location
Eugene, Oregon
Started on the radio wiring in the halftrack. i have the installation manual so should an interesting project.

Don G.
finished up the OEM side of the radio wiring. Will be starting on the radio install next.
Don G.
 

Attachments

Top