• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

I will pay $20 dollars to the first person who posts a picture of M35A3 jackshaft installed with ruler showing ujoint center to center!!!

gentrysgarage

Active member
553
118
43
Location
Lost Angels, CA
Like the title says I need the center to center INSTALLED distance of the ujoints of the M35A3 jackshaft . I am willing to pay 20.00 via PayPal to the first person who gets me a picture with a ruler! I need this measurement before I drill holes for the crossmember . I had gotten a guestimate before of 6 1/2 inches and I can't open it up past 5 1/2 on the one I have. Sooner is Better
IMG_2995.JPGIMG_2989.JPGIMG_2991.JPGIMG_2992.JPGPPPLLLLEEEEAAAASSSSSEEEEEEE!
 
Last edited:

gentrysgarage

Active member
553
118
43
Location
Lost Angels, CA
Sorry for the late reply been putting 12 and 14 hours in on the M135 on my off week that I am too tired and worn out to type replys..please forgive me!

You're welcome! Don't worry about it. If our paths ever cross, you can buy me dinner!:)
NOT A Problem! You helped me imeansly!!!!!!!

Maybe it's full of grease? Take the grease zerk out and see if you can pull it apart farther. Will the dust cover unscrew?
Well you gave me the courage to pry the HECK out of it and I got 6 1/8"! It was all Suction of the grease inside! I am going with 5- 3/4" seperation to play it safe.

Look like two different shafts.
This is a M35A3 shaft they look a little stubby!...it is the red headed stepchild/Mutant of the M35 family. LOL!!!

A little off-topic - that looks like quite a project! Do you have another post here about what you're doing on that truck?
Thanks! Sure do here: https://steelsoldiers.com/threads/m135-s-and-m-build.172124/
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks