• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Jack rail/rock slider question

JO302

Member
27
17
8
Location
Atlanta, GA
Has anyone on here bought the Western Kentucky Surplus/ebay rails ($495)? Curious if you’re happy with the quality and fit.

Thanks!


Sent from my iPhone using Tapatalk
 

Robhawg

New member
18
10
3
Location
Utah
I have and they were good to work with, shipping was fast and the fit is good, I am just worried about dissimular metal issues. I may remove them to put some insulation between them.

Cheers
 

JO302

Member
27
17
8
Location
Atlanta, GA
I have and they were good to work with, shipping was fast and the fit is good, I am just worried about dissimular metal issues. I may remove them to put some insulation between them.

Cheers
Thank you! Good call regarding the steel against aluminum. I’m thinking between the powder coat on the rails and the raptor liner on the body it should be good?


Sent from my iPhone using Tapatalk
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,569
3,473
113
Location
Brooklyn, NY
Thank you! Good call regarding the steel against aluminum. I’m thinking between the powder coat on the rails and the raptor liner on the body it should be good?


Sent from my iPhone using Tapatalk
Saran wrap between the two, or some such barrier should be fine for like 30 years. So would rhino liner.
 

Coug

Well-known member
Steel Soldiers Supporter
2,953
4,296
113
Location
Olympia/WA
in the irrigation section of the hardware store they sell 20 mil PVC tape. I've been using it as a barrier for all my projects where there are dissimilar metals.


 

JO302

Member
27
17
8
Location
Atlanta, GA
in the irrigation section of the hardware store they sell 20 mil PVC tape. I've been using it as a barrier for all my projects where there are dissimilar metals.


Great suggestion! This option sounds easier to apply and cut to fit.


Sent from my iPhone using Tapatalk
 
Top