• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LH drivers side "box" ammo door

O

ODAddict

Active member
Steel Soldiers Supporter
100
200
43
Location
Charlottesville, VA
Production shifted to B1s in April, 1958. It appears that for a while, Dodge used up existing parts stock from the basic M37 inventory.

f I'm not mistaken, the B1s were modified to include a staple such that the door could be secured with a padlock. My B1 (October 1958) has a rather crude modification to the doors made by using a torch to cut both the staple from bar stock and a rectangular hole in the door itself.

If you're not in a hurry, I may have a door . I have both an unmodified M37 set and my original cutouts.
 
M37Dale

M37Dale

New member
12
4
3
Location
Alberta, Canada
ODAddict said:
Production shifted to B1s in April, 1958. It appears that for a while, Dodge used up existing parts stock from the basic M37 inventory.

f I'm not mistaken, the B1s were modified to include a staple such that the door could be secured with a padlock. My B1 (October 1958) has a rather crude modification to the doors made by using a torch to cut both the staple from bar stock and a rectangular hole in the door itself.

If you're not in a hurry, I may have a door . I have both an unmodified M37 set and my original cutouts.
Click to expand...
Let me know. And thanks
 
M37Dale

M37Dale

New member
12
4
3
Location
Alberta, Canada
ODAddict said:
Production shifted to B1s in April, 1958. It appears that for a while, Dodge used up existing parts stock from the basic M37 inventory.

f I'm not mistaken, the B1s were modified to include a staple such that the door could be secured with a padlock. My B1 (October 1958) has a rather crude modification to the doors made by using a torch to cut both the staple from bar stock and a rectangular hole in the door itself.

If you're not in a hurry, I may have a door . I have both an unmodified M37 set and my original cutouts.
Click to expand...
hello, wondering if you have made any progress on these? Ironically the one on the right side has a locking tab for the handle. either one would be fine if you have one.

Dale
 
You must log in or register to reply here.
108,589members
163,839threads
2,305,159posts
295online users
Top