Bunkerbuilder
New member
- 267
- 1
- 0
- Location
- On the land near Northern Nevada
NP200 / NP201 TRANSFER CASE PARKING BRAKE onto NP205 TRANSFER CASE
Im using a parking brake off the rear of a NP200 / NP201 as I want a mechanical parking brake and since converting the 14 bolt rear differential of my own design disc brakes the truck has no parking brake and since I like this one better than the aftermarket disc brake on the NP205..Here is what the drum looks like before the hub is installed.
http://www.steelsoldiers.com/asset.php?fid=513287&uid=14409&d=1424574890http://www.steelsoldiers.com/asset.php?fid=513294&uid=14409&d=1424576896http://www.steelsoldiers.com/asset.php?fid=513297&uid=14409&d=1424577001http://www.steelsoldiers.com/asset.php?fid=513298&uid=14409&d=1424577420Lots of pics in this thread but at the moment cannot figure out how to copy them from the stored area to this thread.NP200 Manual..http://ImageEvent.com/moosecreekmaple/np200Received the np200 brake parts on 03/03/2015cleaned them up and sand blasted them...Took them to a well know driveline shop in town and now I wait till the flange is made and the bracket is modified.Pics of the parts on various stages.Bearing retainer and mod to rear of housing.
Im using a parking brake off the rear of a NP200 / NP201 as I want a mechanical parking brake and since converting the 14 bolt rear differential of my own design disc brakes the truck has no parking brake and since I like this one better than the aftermarket disc brake on the NP205..Here is what the drum looks like before the hub is installed.
http://www.steelsoldiers.com/asset.php?fid=513287&uid=14409&d=1424574890http://www.steelsoldiers.com/asset.php?fid=513294&uid=14409&d=1424576896http://www.steelsoldiers.com/asset.php?fid=513297&uid=14409&d=1424577001http://www.steelsoldiers.com/asset.php?fid=513298&uid=14409&d=1424577420Lots of pics in this thread but at the moment cannot figure out how to copy them from the stored area to this thread.NP200 Manual..http://ImageEvent.com/moosecreekmaple/np200Received the np200 brake parts on 03/03/2015cleaned them up and sand blasted them...Took them to a well know driveline shop in town and now I wait till the flange is made and the bracket is modified.Pics of the parts on various stages.Bearing retainer and mod to rear of housing.
Attachments
Last edited:
