Pulling the transmission!!!

[joec]

I have a hoist built for taking tranny out and engine from military.. Bought it from Joe Young when he was doing trucks..

I will be listing it soon but it will be sold local for $500 pick -up only

 

[Bigred77]

did you ever get you truck back together Jacob? What was the name of that deuce junkyard?

 

[Jakob]

did you ever get you truck back together Jacob? What was the name of that deuce junkyard?

I'm actually finishing it up today. I have to go get the gear oil and drop the batteries off to get charged. I probably won't get it on the road, but it'll be running again.

 

[Bigred77]

I'm actually finishing it up today. I have to go get the gear oil and drop the batteries off to get charged. I probably won't get it on the road, but it'll be running again.

Sweet! We will have to go crusin once its back together. Do you remember the name of that Deuce junkyard down in brandenburg?

 

[ajg6989]

we used a tankers bar across the windshield to the cab rear and a chain hoist the jack was too slow and too much crawling in the mud in Korea.

 

[chipola]

fly wheel

i just replaced my trans . used a bar and chain hoist, the large floor jack i had wouldn't reach high enough. but i digress watch that fly wheel if you take it loose it weights a whole lot more than it looks. while your are at it this is the perfect time to work on any thing under the dash. dud

 

[Jakob]

I got my batteries charged, everything back together, turned the power on, hit the switch and a deafening silence

 

[chipola]

look around

look around anybody watching with a smirk on their face if so shoot'em,dud

 

[ptg530C]

Rent a trans jack to put it back in.

 

[Bigred77]

I got my batteries charged, everything back together, turned the power on, hit the switch and a deafening silence

did you forget a cable?

 

[Jakob]

did you forget a cable?

The only cable that I remember removing (and reinstalling) was a ground strap on the bell housing.

The wiring to the switch itself wasn't loose and the switch FELT like it was clicking.

 

[Bigred77]

The only cable that I remember removing (and reinstalling) was a ground strap on the bell housing.

The wiring to the switch itself wasn't loose and the switch FELT like it was clicking.

no, on your batterys

 

[Jakob]

no, on your batterys

The batteries are good, I went over them twice.