Repairing the M101A1...

[taildragger03]

All right everyone. I have to repair the front wall of my trailer. Three welds have separated for the flooring. The trailer is CARCed so I am going to strip it down to bare metal in order to get a good bead. Anything I should I be aware of when welding. I am planning on setting a bead along the inside of the bed as well. Any input on this would be great!

 

[m16ty]

Just make sure you get all the CARC cleaned from the weld area (even the back side). From what I understand, CARC is the most toxic when it is burned.