Special delivery

[jcollings]

Special delivery new NOS Genhead replacement.......
Now just a lot of verifying before install.

Cause for replacement , Is failed to drive disc, stator failure

Sent from my SM-G975U using Tapatalk

 

[jcollings]

Not Good......

Sent from my SM-G975U using Tapatalk

 

[Light in the Dark]

Glad to see it made it down exactly as it left... never do know with truck lines these days. Good luck with the reinstall, hopefully you will be making power sooner than later!

 

[G744]

I'd get that new flexplate Magnafluxed before installation from the looks of the old one.

Cheap insurance!

 

[marchplumber]

Wow....thats not a tac and rinse ordeal. Holy smokes

 

[jcollings]

Wow....thats not a tac and rinse ordeal. Holy smokes

Yes, plenty of smoke and a few sparks to boot when failed.Then
the "oh crap" felling set in


Sent from my SM-G975U using Tapatalk

 

[jcollings]

Ready for ohms and wire tests

Sent from my SM-G975U using Tapatalk

 

[jcollings]

Rotor tested good...

Sent from my SM-G975U using Tapatalk

 

[jcollings]

Also had new replacement drive disk magnaflux, also checked out good,

Sent from my SM-G975U using Tapatalk

 

[jcollings]

Ready to install new bearing

Sent from my SM-G975U using Tapatalk

 

[marchplumber]

Hey! Wheres the mud? Aren't ya supposed to have mud?


ROFLMBO!!

You'll have her humming along in no time!! NICE!!

 

[jcollings]

How about some red mud...lol

Sent from my SM-G975U using Tapatalk

 

[marchplumber]

Plain and simple, gonna be a good job....ya bled on it! Ask Chucky! Lol. Keep up the good work!!

 

[chucky]

If you dont have any(skin) in the game why bother ! Blood equity !

 

[Light in the Dark]

Thats the nice thing about new in box versus used takeout... the factory documents!

 

[Light in the Dark]

Ready to install new bearing

Sent from my SM-G975U using Tapatalk

Where did you find the bearing at for a good price, if you don't mind sharing the source?

 

[jcollings]

Motion industries

Sent from my SM-G975U using Tapatalk

 

[Farmitall]

Motion industries

Sent from my SM-G975U using Tapatalk

This is not a $54+ dollar bearing. It's a very ubiquitous item and made by a few companies and distributed under several names, ranging in price from $3.30 to the moon.

Deep groove ball bearing 6305-2rs-skf - 25x62x17 mm | 123bearing

 

[Light in the Dark]

Thats a great price, Thanks

 

[jcollings]

SKF

www.skf.com

Sent from my SM-G975U using Tapatalk