• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Torque rod bushing replacement

HN6

Well-known member
221
401
63
Location
alaska
replaced all 12 bushings. in the end I removed one u bolt for top dog bones. I couldn't get both nuts off with u bolts still on. I bought a short socket ground it down a bit and welded a bar to it to fit between ubolt. Much easier to just remove ubolts if they come out easy. Homemade steel wedge worked great for putting pressure on joint and then hitting hard with a sledge popped em out. Used a press like everyone else to press out and reinstall. I did not use a perfect size cylinder to press back in just a flat plate over back side and pressed in till flat.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks