- 1,450
- 119
- 63
- Location
- Gray, GA
On to the water pump...
So apparently this is the only picture I have of the water pump. This is the water pump cavity if you've never seen it. Use a new copper seal and antisieze around the surfaces. Moving on...
![20170729_201836.jpg 20170729_201836.jpg](https://www.steelsoldiers.com/data/attachments/476/476698-9e3bc5850399bf4bf8ab241763186755.jpg)
Old thermostat. May as well replace it while the coolant is drained.
![20170730_143016.jpg 20170730_143016.jpg](https://www.steelsoldiers.com/data/attachments/476/476699-e8def177532d6707ebb580b2f9034473.jpg)
All cleaned up with new inner seal installed.
![20170730_144542.jpg 20170730_144542.jpg](https://www.steelsoldiers.com/data/attachments/476/476700-e8fde5f1505500a2b2c49d638520c225.jpg)
New thermostat properly fitted and tested on the stove.
![20170730_144651.jpg 20170730_144651.jpg](https://www.steelsoldiers.com/data/attachments/476/476701-8d324fc4d2eb5ec6647a96a05c4473e7.jpg)
New long overflow hose from tank to radiator...just because I had one.
![20170730_150010.jpg 20170730_150010.jpg](https://www.steelsoldiers.com/data/attachments/476/476702-2eae99ce6a96f73e740c3fd570f358df.jpg)
New coolant, SCA additive and filter. Couldn't find my test strips and had to buy more. Par for course...again. I also ran an inspection camera through the radiator while it was empty. I was prepared to put in a new one at this point if it was in bad shape. Very happy that this one looked perfect inside. No scale or build-up anywhere.
![20170730_153818.jpg 20170730_153818.jpg](https://www.steelsoldiers.com/data/attachments/476/476703-1bb5e28446db0fbc9b8fabdc8b20a3ac.jpg)
All new belts.
![20170730_022506.jpg 20170730_022506.jpg](https://www.steelsoldiers.com/data/attachments/476/476704-064cecdb3b36c48f1742ba9365742826.jpg)
Replaced the heater hoses.
![20170730_140939.jpg 20170730_140939.jpg](https://www.steelsoldiers.com/data/attachments/476/476705-2af8ad032bdb26be042a67ffc550b3c5.jpg)
And added the hood handle reinforcement tabs I forgot to put on when I replaced the hood.
![20170730_171954.jpg 20170730_171954.jpg](https://www.steelsoldiers.com/data/attachments/476/476706-196d300587b033e109137525203f9622.jpg)
Oil and filter change.
![20170807_173827.jpg 20170807_173827.jpg](https://www.steelsoldiers.com/data/attachments/476/476707-2b0f6063075338c82a0d071d54661ab7.jpg)
New driver side axle boot.
![20170817_212929.jpg 20170817_212929.jpg](https://www.steelsoldiers.com/data/attachments/476/476710-ae987ea8081ae3b1dc1d603c6618b86f.jpg)
And a shakedown run to the Dairy Queen.
![20170730_175438.jpg 20170730_175438.jpg](https://www.steelsoldiers.com/data/attachments/476/476708-d32fb9e889c6d711cc47dcd8f350ec8f.jpg)
So apparently this is the only picture I have of the water pump. This is the water pump cavity if you've never seen it. Use a new copper seal and antisieze around the surfaces. Moving on...
![20170729_201836.jpg 20170729_201836.jpg](https://www.steelsoldiers.com/data/attachments/476/476698-9e3bc5850399bf4bf8ab241763186755.jpg)
Old thermostat. May as well replace it while the coolant is drained.
![20170730_143016.jpg 20170730_143016.jpg](https://www.steelsoldiers.com/data/attachments/476/476699-e8def177532d6707ebb580b2f9034473.jpg)
All cleaned up with new inner seal installed.
![20170730_144542.jpg 20170730_144542.jpg](https://www.steelsoldiers.com/data/attachments/476/476700-e8fde5f1505500a2b2c49d638520c225.jpg)
New thermostat properly fitted and tested on the stove.
![20170730_144651.jpg 20170730_144651.jpg](https://www.steelsoldiers.com/data/attachments/476/476701-8d324fc4d2eb5ec6647a96a05c4473e7.jpg)
New long overflow hose from tank to radiator...just because I had one.
![20170730_150010.jpg 20170730_150010.jpg](https://www.steelsoldiers.com/data/attachments/476/476702-2eae99ce6a96f73e740c3fd570f358df.jpg)
New coolant, SCA additive and filter. Couldn't find my test strips and had to buy more. Par for course...again. I also ran an inspection camera through the radiator while it was empty. I was prepared to put in a new one at this point if it was in bad shape. Very happy that this one looked perfect inside. No scale or build-up anywhere.
![20170730_153818.jpg 20170730_153818.jpg](https://www.steelsoldiers.com/data/attachments/476/476703-1bb5e28446db0fbc9b8fabdc8b20a3ac.jpg)
All new belts.
![20170730_022506.jpg 20170730_022506.jpg](https://www.steelsoldiers.com/data/attachments/476/476704-064cecdb3b36c48f1742ba9365742826.jpg)
Replaced the heater hoses.
![20170730_140939.jpg 20170730_140939.jpg](https://www.steelsoldiers.com/data/attachments/476/476705-2af8ad032bdb26be042a67ffc550b3c5.jpg)
And added the hood handle reinforcement tabs I forgot to put on when I replaced the hood.
![20170730_171954.jpg 20170730_171954.jpg](https://www.steelsoldiers.com/data/attachments/476/476706-196d300587b033e109137525203f9622.jpg)
Oil and filter change.
![20170807_173827.jpg 20170807_173827.jpg](https://www.steelsoldiers.com/data/attachments/476/476707-2b0f6063075338c82a0d071d54661ab7.jpg)
New driver side axle boot.
![20170817_212929.jpg 20170817_212929.jpg](https://www.steelsoldiers.com/data/attachments/476/476710-ae987ea8081ae3b1dc1d603c6618b86f.jpg)
And a shakedown run to the Dairy Queen.
![20170730_175438.jpg 20170730_175438.jpg](https://www.steelsoldiers.com/data/attachments/476/476708-d32fb9e889c6d711cc47dcd8f350ec8f.jpg)