General Hood
Member
- 712
- 2
- 18
- Location
- Fort Towson, OK
I'm guessing there's clearance with the hood raised. That's a beefy bumper for sure
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your HMMWV today/lately
- Thread starter Warthog
- Start date
infidel got me
Well-known member
- 1,679
- 32
- 48
- Location
- Newberry, Florida
Yes, hood will clear when raised. My cracker jack phone takes crayon pictures. This thing is really bad a@@ in person. He is a
welder/fabricator by trade, everything has gussets and is boxed. Welds are so pretty I started to tear up
Another Ahab
Well-known member
- 17,988
- 4,527
- 113
- Location
- Alexandria, VA
Here, use some of my tissues. I don't need 'em all.
A beautiful weld will do that to you, every time....
Dock Rocker
Active member
- 980
- 72
- 28
- Location
- Jackson ms
People who have never attempted to stack up nickels themselves will never be able to appreciate it when it's done right.
The pro's make it look so easy!
Sent from my iPhone using Tapatalk
infidel got me
Well-known member
- 1,679
- 32
- 48
- Location
- Newberry, Florida
Another Ahab
Well-known member
- 17,988
- 4,527
- 113
- Location
- Alexandria, VA
A good looking bead of weld is a right beautiful thing.
Just thinking about it starts me to misting up...
Just thinking about it starts me to misting up...
infidel got me
Well-known member
- 1,679
- 32
- 48
- Location
- Newberry, Florida
Got this job box at a surplus store in Orlando about 4 years ago for 20 bucks. I kept my 1 inch air gun and 5 ton stuff in it. I made some more bench space and repurposed it. Screwed it to the deck and mounted my fuel cans to it. I do have the other fuel cap-- I touched it up
Last edited:
Another Ahab
Well-known member
- 17,988
- 4,527
- 113
- Location
- Alexandria, VA
That looks like it was all designed to fit, real nice. ![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
General Hood
Member
- 712
- 2
- 18
- Location
- Fort Towson, OK
Looks like it was meant to be. Stacks up nicely behind that partition divider you installed
erasedhammer
Active member
- 843
- 60
- 28
- Location
- Maryland
****, I need one! Ever see another anywhere?
nspctr1
Member
- 187
- 6
- 18
- Location
- San Antonio TX
Does the mirror screw in or use adhesive?
3jacks
Active member
- 153
- 39
- 28
- Location
- Near Jackson, MO
If you bought the one I did...3 screws
nspctr1
Member
- 187
- 6
- 18
- Location
- San Antonio TX
did you have to drill in to the frame or are the holes existing?
3jacks
Active member
- 153
- 39
- 28
- Location
- Near Jackson, MO
i used the mirror as a template and drilled the frame. Used #10 sheet metal screws to attach.
cptnblk
New member
- 12
- 0
- 1
- Location
- Manhattan Mt
Can I get an ambulance soft top for my four door? What additional parts are needed?
NormB
Well-known member
- 1,220
- 72
- 48
- Location
- Cloverly,MD
They're for sale over on epay. I've seriously considered one myself but for the bows.
- 5,604
- 2,898
- 113
- Location
- Metairie/La (N'awlins)
The bows are the easy part. They are just taller. You would have to just lengthen them. The tuff stuff is the C-Pillar and I think it also takes a different B pillar.
hangarhermit
Member
- 53
- 3
- 8
- Location
- Houston / Texas
Inventoried new fording kit, repaired end connector of 25 ft slave cable, and acquired two high back seats along with the rear seat bulkheads and bottom and back cushions. Anything I could do while working in or near A/C. I need to start following the Red Dot threads. That is going to be a priority.
NormB
Well-known member
- 1,220
- 72
- 48
- Location
- Cloverly,MD
This. Cutout yesterday, painted last night, cut out stencil last night, painted this AM.
Wife says "why?"
Well, it's like the one here in the PS magazine cartoon. Did I really need the lettering? Well, it's on the drawing.
Obsessions. I'd never question her devotion to her pets. Or the kids.
But we're watching a Nicolas Cage flick (Knowing) together - how can I fault her?
Also changed the 3/4ID heater hose 'tween crossover pipe and water pump.
Meant to do it when I changed coolant and hoses months ago... seemed like a real PITA, I'd get to it eventually.
Then I noticed a small patch of fresh oil under the truck. After an oil change. I missed the filler a bit. But I'd wipe it off and it'd come back. Pretty weird. Fresh oil starts looking blackish pretty fast in this engine. Then the other day I noticed a LOT more, a patch about 3" wide on garage floor. Felt funny, smelled weirder, tasted awful.
Antifreeze.
Yep, hose was leaking.
Board would've made more sense to have made six-eight months ago. But I've always been pretty limber, yoga in my youth, first through obstacle courses all through enlisted and officer's basic, advanced course, leaning on crossover pipe, like doing pushups, generator bracket, one toe on the washer bottle platform... yeah, woulda, coulda, shoulda.
Pretty easy to make, but measurements don't work, gotta mark up to match your own.
Next time.
Wire Fox
Well-known member
- 1,252
- 161
- 63
- Location
- Indianapolis, Indiana
Took me a little while to find this... The write-up is in PS 519 (Feb 1996), page 28. I found it in the "HMMWV Quick Reference Guide, Third Edition" Thanks for sharing images of your build of it. I might throw one together myself.