shawnshumvee
Member
- 336
- 6
- 18
- Location
- Janesville WI
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
That's a pretty nifty idea to add storage and other capabilities on what otherwise is a real nose-wart of a cover. I'm going to steal that idea.just wanted to share these images of a friend of mine who built this pretty cool stereo system
If any one needs cv boots for the humvee (like who doesn’t) they are Available at Napa
Under this part number...
View attachment 717195
looks nifty, but are those the power wires running under the seal near the passenger seat? How does he fasten the top left dzus fastener?just wanted to share these images of a friend of mine who built this pretty cool stereo system
The pinion nut is a bit more complicated than just torque it down. There is a crush sleeve inside and there are close tolerances. The torque resistance (or something like that) needs to be measured before the nut is removed. The specifics are in the books. Look for diff input yoke replacement section.Yes...very nice use of space, maybe a drop in cup holder on top of the lower surface. I also have a question if anybody might have a answer? Replaced the seals on the front differential. found the torque specs for eveything except the pinion shaft yoke lock nut. Torque or procedure???
Got my front and rear hydraulic winches working. There was a problem turned out I need to add two shut off valves and turn the valve off for the one not in use. Of course mile marker said HMMWV's only have front or rear winches not both so it took a minute to figure out how to make it work.
View attachment 717150View attachment 717151View attachment 717152
I LOVE that BIG WHITE STAR on your hood!View attachment 717577View attachment 717578View attachment 717581
I finished up painting my rig last fall and didn't get around to posting any pictures. It looks great at 10', and that's what I was going for.
Also, upholstered the inside...I cleaned mine up and fabricated an aluminum roof.
Sent from my iPhone using Tapatalk
I like it. I like it a lot.Also, upholstered the inside...
Sent from my iPhone using Tapatalk
Fabricated myself, got a shop in Staten Island New York. Started working on a friends, now I’ve got a few of my own. Thank you!I like it. I like it a lot.
Is this a kit or did you literally fab it yourself?
Sent from my SM-G930P using Tapatalk
I wish I still lived in SI, I would so ask you to fab me a set.Fabricated myself, got a shop in Staten Island New York. Started working on a friends, now I’ve got a few of my own. Thank you!
Here’s another hard top I’ve done recently
I hope to fabricate these things all day long!
.
Sent from my iPhone using Tapatalk
Also, upholstered the inside...
Sent from my iPhone using Tapatalk
I can, where are you located??if you can fab doors and tops you'll have people buying you out of stock... I'd be in that line.