4bogginchevys
New member
- 623
- 1
- 0
- Location
- rathdrum idaho
redirect again please... (scroll down)
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Do you have a camera and 2 minutes??
- Thread starter 4bogginchevys
- Start date
Armada
New member
- 3,046
- 4
- 0
- Location
- Buick City, MI
It is not the answer. You don't need it. It's a noise supressor for communications equipment. Swing and a miss.
4bogginchevys
New member
- 623
- 1
- 0
- Location
- rathdrum idaho
the wind
the wind is leaving my sails as i read....LOL
the wind is leaving my sails as i read....LOL
4bogginchevys
New member
- 623
- 1
- 0
- Location
- rathdrum idaho
try this on for size
1 new 230.00 alternator (pass side) and 1 that was existing, but tested fine. in order from driver to passender at testing points it goes 14.7dr.....14.7 pass at NG.....was 22.3 and diminished to 19.6 at pass side pos. and front battery was as dead as it can get shortly after. All of the battery drain in this scenario happened in less than an hour but the head lights were on as truck ran.....obviously it seems that the new alt isn't up to snuff......had it tested again at place of purchase....OK....how can I test the alts on the truck individually without causing issues with lac of ground or read back from the batts.. thank you again, and again
1 new 230.00 alternator (pass side) and 1 that was existing, but tested fine. in order from driver to passender at testing points it goes 14.7dr.....14.7 pass at NG.....was 22.3 and diminished to 19.6 at pass side pos. and front battery was as dead as it can get shortly after. All of the battery drain in this scenario happened in less than an hour but the head lights were on as truck ran.....obviously it seems that the new alt isn't up to snuff......had it tested again at place of purchase....OK....how can I test the alts on the truck individually without causing issues with lac of ground or read back from the batts.. thank you again, and again