PDA

View Full Version : M35 wiring diagram



ken
12-17-2004, 11:51
Does anyone know where i can find a wiring diagram for my M35? When i bought the truck A few of the wiring harneses were broken. I need to hook up turning signals, horn, and the high-low beam switch. Can anyone tell me what the box on the drivers side front fender well is for? It has wires comming to it but the ones comming out are cut off. thanks.

Recovry4x4
12-17-2004, 13:41
Ken, you can download manuals from Logsa. Check the deuce tips section for that. The best schematic is in the TM 9-2320-361-20 and its in the appendix. It's a pullout and I suggest to any deuce owners, if you can afford a paper copy of this manual, get it! My intention is to take it to Kinkos and copy it then laminate the copy. I've done this with the former CUCV and haaving that copy that you can stick on the truck with a magnet is priceless when troubleshooting harness problems.

ken
12-17-2004, 17:34
THANKS! Printing it out and keeping it with the truck sounds like a great idea!

steelsoldiers
12-17-2004, 22:00
That is an outstanding idea Kenny!

outlaw
12-17-2004, 22:05
the box on the fender is the turn signil control