• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M923 MPG and Differential Oil Seal Leak

gijoel

Member
41
11
8
Location
San Bernardino, CA
I have a M923 truck. It went on its first major trip, 1200 miles round trip (Burning Man). Truck ran great and I got great gas mileage. I calculated about 5 miles to the gallon.. yes, 5 miles to the gallon. I even had a friend do the calculations and he came up with the same numbers. Is this right?

Prior to the trip, we had to replace the front axle differential oil seal (500177). it was a class III leak. Fifty miles into the trip, we notice gear oil seeping from the same area prior to the seal replacement, class III leak. We had a friend who is a professional diesel mechanic install it so I know it was done right. Has anyone had any issues with oil leaking from this area? We cleaned out the axle air vents so there is no air blockage… but I might add, about 200 miles into the trip, I checked the gear oil level and when removing the filler plug, I heard some air escape. Any ideas or thoughts?
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,247
1,168
113
Location
NY
I thought they were diesel.
 

gijoel

Member
41
11
8
Location
San Bernardino, CA
I pulled off the vent and I can blow through it. I also stuck a wooden rod down the port and it went in a few inches. I thought maybe there is another vent port somewhere else. I look at the TM later this weekend. I have to clean out the truck and power wash it. I have playa dirt and dust everywhere.
 

Tow4

Well-known member
Steel Soldiers Supporter
2,088
622
113
Location
Orlando, FL
If you heard air escape, the vent is plugged.

5 MPG sounds about right. I get 6 MPG with the M818.
 

gijoel

Member
41
11
8
Location
San Bernardino, CA
That is great news to hear 5mpg to the gallon. I think we were averaging about 5.3 and this includes hauling 500 gallons of water, 1200 lbs of ice, 1500 lbs of camping gear and another 1000 lbs in misc. supplies. I was surprise how the truck handled and although slow going up the hills, it did it at 35mph and this includes the grade from Bishop to Tom's Place. I think our group is going to be purchasing another one of these trucks. One thing I am going to do immediately, replacing the original seat. My poor back.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,196
314
0
Location
gainesville, ga.
Instead of replacing the vent, install a vent LINE system, no more pluged vents and blown seals
 

rrrr

Member
752
0
16
Location
Missouri
I pulled my vents and installed long rubber hoses attached to a small in line fuel filter. Works great and no issues so far.
 

gijoel

Member
41
11
8
Location
San Bernardino, CA
i am going to look at pulling all vents out and going with lines.

Today I meet with the camper engineer to design a rugged offroad camper for the bed. We plan to go over what I want, amenities, budgets, and so on. I will post pictures and keep a log of the development efforts and final product.
 
Last edited:

wreckerman893

Possum Connoisseur
15,612
1,984
113
Location
Akenback acres near Gadsden, AL
I thought the Burning Man event was when a bunch of weirdos got together, danced around the fire naked and howled at the moon....why would anyone want to get together with a bunch of other like minded crazy people and.........errrrrrr.....never mind.
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,206
1,571
113
Location
Dayton, OH
I thought Burning Man was when Gimpy has one too many and tries jumping the bonfire at a rally. That makes any SS Rally a Burning Man.
 

Scarecrow1

New member
1,355
1
0
Location
Florence , S.C.
These things are known to go through fuel at an alarming rate. Even the Deuces run at about 10 mpg at best. Empty are loaded doesn't seem to make any difference to mine. I know when it comes time to fuel it , just shut up and pay the nice pump :) That's why I have my motorcycle to balance out my carbon foot print .....Yeah right
 

Karl kostman

Well-known member
Steel Soldiers Supporter
2,287
847
113
Location
Fargo ND
If I am on the highway at a constant RPM I can get 5 MPG out of my 925A1 on short trips into town and back (16 miles) I have found it to be more around 2 MPG
KK
 

Artisan

Well-known member
2,762
227
63
Location
CDA Idaho
Guys I would love a material list and or pics regarding the vent lines.
I would like to know what the hole tap sizes are
so I can get materials together and do mine when I go up there next .

Is it 3/8" NPT or what? Did you just go w/ maybe a 3/8" MNPT X Barb
brass fitting and hose w/ a filter of choice up high?
 
Top