• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Can you mix 'n match airpacks? - One long one short on an USAF Deuce.

lino

Member
148
2
18
Location
Wake Forest, NC
Hey All,

I have a dual circuit brake deuce. '88 USAF model.

On of my airpacks has the rear mounting stud broken off (both are long style).
My plan has been to go thru the brake system rebuilding or replacing as I go, this just accelerates part of the plan.


So, I'd prefer to have short airpacks because of their design, but because of price and availability, it will be difficult to replace both at once.
Would there be any issues if I replaced one of the long airpacks (the broken one) with a short one?

Said differently, can you run one long airpack and one short one on a dual circuit deuce?


Thanks

ciao
lino
 

welldigger

Active member
2,602
15
38
Location
Benton LA
I don't see why running 2 different air packs will be a problem. This might cause a small pressure difference between front and rear but I don't see that being a serious issue.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,177
113
Location
NY
They do not separately control "front and rear".

Best to state what you know, and not speculate.
 

welldigger

Active member
2,602
15
38
Location
Benton LA
They do not separately control "front and rear".

Best to state what you know, and not speculate.
I'm a little confused by your statement. Am I incorrect that one air pack boosts the front brake circuit and the other air pack boosts the rear circuit?
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,177
113
Location
NY
Yes, you are.

A look at the TM will help you better understand it. Look at the parts TM for the brake lines.
 

lino

Member
148
2
18
Location
Wake Forest, NC
I had been digging thru that TM before I posted and found nothing that related to my question. Seems like it might b easier just to trace the brake lines under the vehicle.

ciao
lino
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,177
113
Location
NY
How would tracing the brake lines help you answer if you can use one of each air pack?
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,129
113
Location
Athens, Ga.
They do not separately control "front and rear".

Best to state what you know, and not speculate.

I'm a little confused by your statement. Am I incorrect that one air pack boosts the front brake circuit and the other air pack boosts the rear circuit?
Ah. Thank you for that correction.
According to that manual, the dual circuit trucks do break the brakes up into front/rear split.

dualcircuitparagraph.jpg

I tried tracing the lines on the image contained in the SMARPI supplement but I'll be darned if I can tell (I would have broken that into 2 separate images, one for hydraulic and one for air if I had been doing it) where what goes.

dualcircuitlinediagram.jpg

I'd go crawl under my '87 in the driveway if it wasn't pouring cats and dogs right now.
 

welldigger

Active member
2,602
15
38
Location
Benton LA
After studying the manual best I can tell is the system does split front and rear. The only place they tie together is the differential valve.
 

lino

Member
148
2
18
Location
Wake Forest, NC
Well, it's not abundantly clear in the TM, but if front and rear were on different air packs then one might begin to argue that it's ok to have different air packs. If they do provide different amounts of assist, the effect would be a shift in front/rear bias. These aren't race cars, so a moderate change in bias might not be a big deal.

Most cars split circuits is a cross pattern. I'm pretty sure I read that these split front rear.

Another note is that the A2 with split brakes has an MC with unequal bias in it. Before it even gets to the air packs.
 

patracy

Administrator
Staff member
Administrator
14,632
4,771
113
Location
Buchanan, GA
Lino, the purpose of the brake system is to split the front axle from the rear tandems to increase safety. It's hard to tell in the pic that clinto posted, but that's the case. Section 11-1 A. outlines this in the TM.

IMHO, it'd be best to replace both airpacks with like units. But if it were me, I'd use the larger volume pack on the rears since there's more volume there. Still best practice to replace with matching parts.

You said your airpack stud is broken off, I assume you're talking about the studs that are welded on? A competent welder should be able to repair that for you. Or are you talking about part of the casting ears where the bolts go in to hold the assembly?
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,177
113
Location
NY
I recall several threads describing "diagonal" braking with this system.

A search for "diagonal brake" should find what I'm referring to.
 

lino

Member
148
2
18
Location
Wake Forest, NC
Hey Patracy,

first of all, I think your truck is amazing.

The broken part is the center boss that supports the rear of the pack. My use of stud wasn't quite correct, although there is a stud in that boss. It's the casting that's broken.

The broken one is the one nearest the MC on the left side.
 

rustystud

Well-known member
9,241
2,925
113
Location
Woodinville, Washington
I recall several threads describing "diagonal" braking with this system.

A search for "diagonal brake" should find what I'm referring to.
Actually No. The front is controlled by it's own air-pac and the rear axles by there own air-pac. There was a discussion about the feasibility of going to a diagonal system, but the cost of running two separate lines to each axle was a bit too much.
 

rosco

Active member
Steel Soldiers Supporter
2,102
30
38
Location
Delta Junction, Alaska
Well, it's not abundantly clear in the TM, but if front and rear were on different air packs then one might begin to argue that it's ok to have different air packs. If they do provide different amounts of assist, the effect would be a shift in front/rear bias. These aren't race cars, so a moderate change in bias might not be a big deal.

Most cars split circuits is a cross pattern. I'm pretty sure I read that these split front rear.

Another note is that the A2 with split brakes has an MC with unequal bias in it. Before it even gets to the air packs.
There is a built in bias between the steering axel, and the rear axles, depending on when & how the truck is loaded. The difference between the two air packs (even two of the same kind), will not be noticeable.
 

welldigger

Active member
2,602
15
38
Location
Benton LA
Actually No. The front is controlled by it's own air-pac and the rear axles by there own air-pac. There was a discussion about the feasibility of going to a diagonal system, but the cost of running two separate lines to each axle was a bit too much.
Hmm. Guess my first post was right on the money.
 

lino

Member
148
2
18
Location
Wake Forest, NC
Thanks for the responses, all.

Happily this is a non-issue for me now. I managed to find 2 short airpacks for about what it would cost to rebuild them (I'm hoping I don't have to rebuild...)

But after more digging, and all the above comments, it does seem like it shouldn't matter if there were one of each type of airpack on the truck.


ciao
lino
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks