topo
Active member
- 897
- 219
- 43
- Location
- farmington NM
These pictures if a disc parking brake on a 1943 White 666 .The disc is 14or 15 inches in diameter with two sets of pads . I would like to have this park brake on my M52a2
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Dual circuit brake using pinion and wheel brakes.
- Thread starter Hainebd
- Start date
Hainebd
New member
- 520
- 5
- 0
- Location
- Mays Landing, NJ
Just thinking and I am sorry for bringing this topic back up but why not put 6 disc brake pinion brake system on. Two per axle.
Last edited:
peashooter
Well-known member
- 1,039
- 204
- 63
- Location
- Hanover, minnesota
Maybe you could but what's your reason? I think we must all have different goals for pinion brakes, my goal would be to have a last resort emergency brake as simple to install and $500 or less....dot approval not important since its emergency/parking use only.
Hainebd
New member
- 520
- 5
- 0
- Location
- Mays Landing, NJ
I agree. Should be an improvement. Hydraulic or mechanical? How about air with a maxi can. Then if you loose air presure the brake comes on?
ke5eua
Well-known member
- 2,568
- 40
- 48
- Location
- Baton Rouge (Central), LA
I am loving this topic. While not a deuce guy I would love to switch my drum parking brake and put a pinion parking brake on instead.
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
For just a parking brake 2 disks on whatever 2 pinions you choose would be a vast improvement over the stock deuce parking brake. And would work well in conjunction with the stock park brake.
For an emergency brake I would think a minimum of 4 disks. Even then I would imagine one shot and they are toast.
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
Now that's quite a park brake.
ke5eua
Well-known member
- 2,568
- 40
- 48
- Location
- Baton Rouge (Central), LA
Anyone have a good source for pinion brakes, mainly parking brake. Saw boyce equipment has a kit, anyone else?
red
Active member
- 1,988
- 22
- 38
- Location
- Eagle Mountain/Utah
Diy4x has them as well
red
Active member
- 1,988
- 22
- 38
- Location
- Eagle Mountain/Utah
Where can you get a maxi can and a air brake caliper?
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
Pretty much anyone who builds mud trucks and rock crawlers with 2.5 ton rockwells. Just Google 2.5 ton rockwell pinion brake.
ke5eua
Well-known member
- 2,568
- 40
- 48
- Location
- Baton Rouge (Central), LA
Dagnabbit Bobby!
ke5eua
Well-known member
- 2,568
- 40
- 48
- Location
- Baton Rouge (Central), LA
I emailed a place out of Louisiana about the calipers they use. Seeing if there is an oem version that will bolt up to their kit that will offer a parking brake option. I'm not entirely to keen on the rotor design as it has the company logo in it but for the price it's not to bad, both 2.5 & 5 ton is 350 for a complete kit.
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
Wouldn't happen to be krypyonite kustums would it?
ke5eua
Well-known member
- 2,568
- 40
- 48
- Location
- Baton Rouge (Central), LA
Sycotic Fabrication out of Carencro.
Personally I think for our applications converting the drum to disc on the parking brake would be ideal, at least that is what I'm going for. Also air disc calipers are way expensive. Can get a air brake pack and fab up a bracket to pull the tension on the caliper and do the same thing for way less. That's what I'm planing on doing with my parking brake but if I can go disc I will be happier than a gator with a toothbrush.
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
If you just want a disk parking brake I would put 2 hydraulic calipers on one disk behind the transfer case and have a hydraulic parking brake. It would be simple and almost fool proof.
ke5eua
Well-known member
- 2,568
- 40
- 48
- Location
- Baton Rouge (Central), LA
Biggest thing is the rotors, what lines up to the pinions, both 2.5 & 5 ton.
I was under the impression that holding pressure on hydraulic brakes for long periods of time isnt recommended.
If I could do that I would put a line lock on the front drums instead.
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
Hmm ya a mechanical caliper might be a better option. I'm not really sure what one of those would cost. I think on a deuce you could use the same rotor as a pinion brake. 5 ton I don't know.
rustystud
Well-known member
- 9,071
- 2,388
- 113
- Location
- Woodinville, Washington
There are trucks that use a caliper as the parking brake ( in fact some of our "Ford baby busses" used them) . The park lever pulls a cable that actuates a cam-over block that presses on the caliper ( picture a large vise-grip). I have worked on them before. Pretty simple, but I wouldn't trust my life to them. Of course in an emergency I would use anything at my disposal !
peashooter
Well-known member
- 1,039
- 204
- 63
- Location
- Hanover, minnesota
I think I'm going to try making a "last resort" brake and I'll see how it works. I'm thinking 2x rotors (12") with 2 calipers each. Both rotors mounted to the center axle's pinion. If it works and ever gets used, then replacement rotors should be all that's required.