• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

New Member with M211

Another Ahab

Another Ahab

Well-known member
17,826
4,161
113
Location
Alexandria, VA
Phew. I figured that was the case, but I wasn't sure. It was looking awful ragged but I wasn't sure if that was the one you just finished or not!
That's sort of funny. :beer:
 
H

hambone

Well-known member
288
508
93
Location
El Dorado, Ar
Got everything cleaned up an working freely, going to bead blaster tomorrow
IMG_0487.jpg
This is all that's left of the muffler, guess I'm going to buy one that was mentioned in a post, the one that has the input and output on the same end.
IMG_0486.jpg
 
H

hambone

Well-known member
288
508
93
Location
El Dorado, Ar
About ready to fab the exhaust, has anyone tried to use the early M35 exhaust with the inlet and outlet on the same end?, looks like it's doable, 81/2" dia. x 15" lenght, $35 shipped to door. Thanks, Hambone
muffler.jpg
 
Last edited:
m1010plowboy

m1010plowboy

Well-known member
Steel Soldiers Supporter
3,809
2,374
83
Location
Edmonton, Canada
G749 muffler

After building the jig and welding up the first muffler the fabricating boys got a little nervous about 'selling' the new mufflers across the border. The challenges with warranty, liability insurance, export permits, a small market and quality customer service makes it cost prohibitive to make a viable business plan. I've been running the new one all summer so still jabbing these guys to come up with some more. The worst case scenario they're worried about are the old gassers that can make the mufflers go boom and having to warranty a product where they can't manage the application. I've been running the new one all summer and am confident these guys know what they're doing, just need to get them over the fraidy cat factor.

What kind of costs are you looking at for the M35 muffler set-up? It might be easier/cheaper to bend a few pipes and come up with a system to install available NOS mufflers then get one these over the border.

P6100014.jpgP6100015.jpgP6100006.jpg
 
H

hambone

Well-known member
288
508
93
Location
El Dorado, Ar
Maybe one day we can own one of those mufflers:grd:but for now I am planning on matching the inlet on the muffler with the pipe coming in, mount the muffler in that position, weld an elbow onto the outlet, use a small piece of flex pipe to mount to my stack, local shop will bend me a stack for $30, weld a leftover flange to the stack so I can use my NOS upper stack, total cost $100. Hambone
 
hendersond

hendersond

Well-known member
Steel Soldiers Supporter
1,171
29
48
Location
Galesville, WI
I purchased everything to do what you are discussing Hambone. Except I went with a muffler to fit a Chevy car. I believe it was from a 80-something impala. Muffler was $70 and a friend bent up some pipes. Purchased some real 12" flex that had exhaust pipe ends and stainless braided center. Good stuff. The pipe ended up being 2.25" but it was looking good! Then I stumbled upon a good original muffler while on vacation for $20. I re-vamped my plan. Using my 20/20 hindsight, it would have been easier to mount the impala stuff, but the goal was "original".
For $100 I say do it!
 
rosco

rosco

Active member
Steel Soldiers Supporter
2,102
27
38
Location
Delta Junction, Alaska
m1010plowboy said:
After building the jig and welding up the first muffler the fabricating boys got a little nervous about 'selling' the new mufflers across the border. The challenges with warranty, liability insurance, export permits, a small market and quality customer service makes it cost prohibitive to make a viable business plan. I've been running the new one all summer so still jabbing these guys to come up with some more. The worst case scenario they're worried about are the old gassers that can make the mufflers go boom and having to warranty a product where they can't manage the application. I've been running the new one all summer and am confident these guys know what they're doing, just need to get them over the fraidy cat factor.

What kind of costs are you looking at for the M35 muffler set-up? It might be easier/cheaper to bend a few pipes and come up with a system to install available NOS mufflers then get one these over the border.

View attachment 654328View attachment 654327View attachment 654329
Click to expand...
That muffler would make anybody proud. But I don't understand the "exploding" part. Back in the old days, I drove those trucks all over the North, thousands of miles, & never had a muffler backfire.

I'm glad to see the enthuasiam for them. It makes me want to go out & kick tires in my bone yard & helps rationalize why I haven't hauled any of it to the dump. Yes I know --- Pictures.
 
USMC 00-08

USMC 00-08

Well-known member
1,163
130
63
Location
Skiatook, OK
hambone said:
I just checked it out, it is a NOS dash/cab wiring harness, lucked up on it on craigslist. Thanks, Hambone
Click to expand...
Could you measure the length of that harness and let me know? I am going to build my own, but don't want to pull the old one out of my truck just yet.

How much did you end up paying for that if you don't mind saying?
 
You must log in or register to reply here.
108,401members
163,708threads
2,303,280posts
1,168online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks